The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Looking for Bagger setup for rider and blade , deck & deck wheel questions, possible issues

Author
Chugchugpop
New Member
  • Total Posts : 5
  • Scores: 0
  • Reward points: 0
  • Joined: 2020/05/25 09:21:38
  • Status: offline
2020/05/25 14:28:31 (permalink)
0

Looking for Bagger setup for rider and blade , deck & deck wheel questions, possible issues

Have a recently acquired HUSKEE LT4200 which is sold @ TSC Stores.

The deck doesn't have wheels on it which I never noticed prior to buying it. The mower's in great shape once I did a service, new blades and power washed it down.

It'll be getting a new belt as well.

I'm wanting to add a bagger to it as we've always bagged our grass.

I've seen the tag under the hood says a 19A30003OEM is the part number.

This gas a Briggs & Stratton Engine, 17.5 hp if I recall correctly.

The part number when searched comes back with alot of MTD search results with wide varying prices from mid to upper $200's range to almost mid $400's range.

Only problem when I look at the description on some of this the part numbers are different on some which I'm thinking some may have been upgraded, different number by the vendor who has it for sale, etc.

I've figured out enough to know that it's a MTD product also.

Another thing if I add or can add wheels to the deck will it help with my yard in getting an even cut going thru it as it seems there's a area where it cuts but gas a slight elevation in some of the path. I've bought factory blades on the tag under the hood.

Maybe I'm not getting even roll on the yard? The yard isn't smooth smooth but it's a typical residential lot in a mid size city. We've lived here since it was new. Push (personal pace) mower seems to mow it fine .

Part of the uneven mow on the yard is for example if I'm doing a turn in the grass vs going to the end and turning around on pavement, sidewalk, etc.

IS there a quick easy way to I guess I'd say "level" things out or make sure the blade mounts are turning where when the blades turning that it's turning level all the way around? I've grabbed the 2 blade mounts after mounting the new blades and rocking them and didn't feel any wobble in them.
post edited by Chugchugpop - 2020/05/25 14:30:14

7 Replies Related Threads

    Chugchugpop
    New Member
    • Total Posts : 5
    • Scores: 0
    • Reward points: 0
    • Joined: 2020/05/25 09:21:38
    • Status: offline
    Re: Looking for Bagger setup for rider and blade , deck & deck wheel questions, possible 2020/05/25 22:41:19 (permalink)
    0
    I hope I didn't post in the wrong topic area or maybe it's not that busy on holidays on the forum. I'll wait a few days and if no luck check another forum out there in cyberspace... 😁
    Roy
    Moderator
    • Total Posts : 1163
    • Scores: 23
    • Reward points: 1
    • Joined: 2016/07/27 22:51:23
    • Location: British Columbia
    • Status: offline
    Re: Looking for Bagger setup for rider and blade , deck & deck wheel questions, possible 2020/05/26 00:03:05 (permalink)
    0
    Give us some time, somebody somewhere should be able to help. As far as the anti scalp wheels are concerned I consider them a waste of time. The lawn is scalped before the wheels reach the high spot and after a couple of seasons they are beat into oblivion.
    AVB
    Super Member
    • Total Posts : 1815
    • Scores: 71
    • Reward points: 0
    • Joined: 2017/06/21 16:35:48
    • Location: Elora, TN
    • Status: offline
    Re: Looking for Bagger setup for rider and blade , deck & deck wheel questions, possible 2020/05/26 08:11:23 (permalink)
    0
    Current MTD PN is 19A30031OEM and lists for $349.99.
    post edited by AVB - 2020/05/28 22:18:42
    Chugchugpop
    New Member
    • Total Posts : 5
    • Scores: 0
    • Reward points: 0
    • Joined: 2020/05/25 09:21:38
    • Status: offline
    Re: Looking for Bagger setup for rider and blade , deck & deck wheel questions, possible 2020/05/27 10:45:44 (permalink)
    0
    Thanks! Appreciate it. You helped me confirm the correct part no. Stores were quoting me $420 and above. Think I'll order online direct from a reputable place.
    Chugchugpop
    New Member
    • Total Posts : 5
    • Scores: 0
    • Reward points: 0
    • Joined: 2020/05/25 09:21:38
    • Status: offline
    Re: Looking for Bagger setup for rider and blade , deck & deck wheel questions, possible 2020/05/27 10:46:07 (permalink)
    0
    Thanks for the insight!
    Chugchugpop
    New Member
    • Total Posts : 5
    • Scores: 0
    • Reward points: 0
    • Joined: 2020/05/25 09:21:38
    • Status: offline
    Re: Looking for Bagger setup for rider and blade , deck & deck wheel questions, possible 2020/05/28 22:01:49 (permalink)
    0
    Would this be the one and will it fit as I noticed it's in stock locally at the home depot.

    The part number had me concerned and I also had noticed that there was a newer part number (superseded) but I can't recall where I saw it and I'd deleted my history before I saw this one today.


    https://www.homedepot.com...w_wcB&gclsrc=aw.ds



    Thanks in advance !! DN
    AVB
    Super Member
    • Total Posts : 1815
    • Scores: 71
    • Reward points: 0
    • Joined: 2017/06/21 16:35:48
    • Location: Elora, TN
    • Status: offline
    Re: Looking for Bagger setup for rider and blade , deck & deck wheel questions, possible 2020/05/29 07:57:35 (permalink)
    0
    Yes according to supersedes here that is the correct part.
     
    Not all the bad of a deal either as they cost my small shop $279 from the distributor
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC