Re: B&S VTwin 24 HP with NIKI Carb
Sorry for not answering faster, I have used SEAFOAM from the beginning and replaced the line from the filter to fuel pump and then to the carb.
It turns out that it had a bent pushrod and the other pushrods were out of adjustment. I replaced the pushrod and cleaned the head and it runs again.
As of last month the safty switches were bad ( checked all and decided that they were to far gone clogged with sand and junk and I don't use the deck for mowing ) so I direct wired the engine and it runs again.
Now it wont start Backfires through the carb so I pulled the valve cover off and the pushrod was bent again.
Now I have to find out what is causing it to eat the pushrods. That will be in a new post.
Thanks for your help