The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Hot!Starts only with Carb spray... blowing my mind

Author
flash_os
Starting Member
  • Total Posts : 9
  • Scores: 0
  • Reward points: 0
  • Joined: 2017/04/18 20:04:00
  • Status: offline
2017/04/18 20:24:48 (permalink)
0

Starts only with Carb spray... blowing my mind

 
I changed...

  • oil
  • carb membrane
  • cleaned all carb paths
  • cleaned air filter and squeezed it from oil
  • Spark plug


But still starts only with Carb spray into air filter sponge... 

14 Replies Related Threads

    Mikel1
    Moderator
    • Total Posts : 669
    • Scores: 31
    • Reward points: 1
    • Joined: 2016/04/14 18:48:53
    • Location: Georgia
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/18 23:51:19 (permalink)
    0
    What briggs model is this?
    Is choke plate on carb closing all the way?
    flash_os
    Starting Member
    • Total Posts : 9
    • Scores: 0
    • Reward points: 0
    • Joined: 2017/04/18 20:04:00
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/19 07:26:12 (permalink)
    0
    I definitely will check  choke plate, thanks.
    I don't know the model but carb looks like that:

    Mikel1
    Moderator
    • Total Posts : 669
    • Scores: 31
    • Reward points: 1
    • Joined: 2016/04/14 18:48:53
    • Location: Georgia
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/21 09:48:09 (permalink)
    0
    I see, tank mounted carb.
    Does it run good after it is started?
    flash_os
    Starting Member
    • Total Posts : 9
    • Scores: 0
    • Reward points: 0
    • Joined: 2017/04/18 20:04:00
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/21 19:18:14 (permalink)
    0
    Yes, run good after it is started.
    And also starts from first yank while still hot (30 minutes).
    flash_os
    Starting Member
    • Total Posts : 9
    • Scores: 0
    • Reward points: 0
    • Joined: 2017/04/18 20:04:00
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/23 20:49:46 (permalink)
    0
    Found, model: 10M902
    Mikel1
    Moderator
    • Total Posts : 669
    • Scores: 31
    • Reward points: 1
    • Joined: 2016/04/14 18:48:53
    • Location: Georgia
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/23 21:02:49 (permalink)
    0
    Looks like carb has a primer bulb, does it work?
    flash_os
    Starting Member
    • Total Posts : 9
    • Scores: 0
    • Reward points: 0
    • Joined: 2017/04/18 20:04:00
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/23 21:13:12 (permalink)
    0
    I can hear some kind of "bubbling-foaming" noises when I push/release.
    Mikel1
    Moderator
    • Total Posts : 669
    • Scores: 31
    • Reward points: 1
    • Joined: 2016/04/14 18:48:53
    • Location: Georgia
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/23 22:01:38 (permalink)
    5 (1)
    Check out link below, check out #10- #12 for primer
    https://www.google.com/ur...bqxheT0KPpeRMhmvdETE0g
    flash_os
    Starting Member
    • Total Posts : 9
    • Scores: 0
    • Reward points: 0
    • Joined: 2017/04/18 20:04:00
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/24 20:06:45 (permalink)
    0
    What can be wrong with that?


    Mikel1
    Moderator
    • Total Posts : 669
    • Scores: 31
    • Reward points: 1
    • Joined: 2016/04/14 18:48:53
    • Location: Georgia
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/24 22:18:36 (permalink)
    5 (1)
    Sometimes the check valve can stick open due to gum or varnish. Also ball bearing can rust up. You should see a squirt of fuel when using the primer.
    Enayet Husain
    New Member
    • Total Posts : 1
    • Scores: 0
    • Reward points: 0
    • Joined: 2017/04/25 10:16:32
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/25 10:24:04 (permalink)
    0
    Probably air leak...

    Editor in Chief, Chainsaw Magazine

     
    flash_os
    Starting Member
    • Total Posts : 9
    • Scores: 0
    • Reward points: 0
    • Joined: 2017/04/18 20:04:00
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/28 19:06:35 (permalink)
    0
    Thank you guys.... Resolved.
    The problem was when you press on primer it's actually spray like deodorant, spray easily can be see when you remove filter and pumping on Primer bulb.
    Thanks to explanation on: https://www.youtube.com/watch?v=yAcdBsGHAVY


    than I just sprayed into this tiny hole with carb cleaner spray.

    Mike you were right, spray hole was clogged.
    post edited by flash_os - 2017/04/28 19:08:54
    flash_os
    Starting Member
    • Total Posts : 9
    • Scores: 0
    • Reward points: 0
    • Joined: 2017/04/18 20:04:00
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/28 19:19:53 (permalink)
    0

    Mikel1
    Moderator
    • Total Posts : 669
    • Scores: 31
    • Reward points: 1
    • Joined: 2016/04/14 18:48:53
    • Location: Georgia
    • Status: offline
    Re: Starts only with Carb spray... blowing my mind 2017/04/29 00:21:34 (permalink)
    0
    I must say youtube videos do come in handy sometimes.
    Glad you got it, great work.
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC