The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Ariens zero turn

New Member
  • Total Posts : 1
  • Scores: 0
  • Reward points: 0
  • Joined: 2015/12/04 10:18:04
  • Status: offline
2015/12/04 10:25:15 (permalink)

Ariens zero turn

Ariens 60 inch zero turn. My switch to activate the blades isn't working properly. They will come on sometimes and will cut off. What can I do to troubleshoot this issue?
post edited by Bill - 2015/12/04 10:27:32

1 Reply Related Threads

    Senior Member
    • Total Posts : 33
    • Scores: 1
    • Reward points: 0
    • Joined: 2015/11/04 14:42:13
    • Location: Jarrettsville, MD
    • Status: offline
    Re: Ariens zero turn 2015/12/17 09:34:59 (permalink)
    If you can find a wiring diagram and can figure out how to test the switch, that would be a good move.
    However, if you can't do that. I would suggest getting a new switch and then go from there. Then you will at least know that it isn't the switch that is bad and can narrow down the culprit.
    Good luck, and be sure to update us on if it you get it working! 
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC