The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Hot!B&S Ready Start Conversion

Author
MikeNic
New Member
  • Total Posts : 3
  • Scores: 0
  • Reward points: 0
  • Joined: 2018/06/16 00:51:08
  • Status: offline
2018/06/16 01:00:32 (permalink)
0

B&S Ready Start Conversion

I have a 175cc B&S on my self propelled mower.  Model 11000, 775 Series.  I want to remove the ReadyStart carb to a bulb type primer system.  The auto choke just doesn't work very well.  What model carburetor should I( use?  Thanks, mike 

5 Replies Related Threads

    Mikel1
    Moderator
    • Total Posts : 938
    • Scores: 39
    • Reward points: 1
    • Joined: 2016/04/14 18:48:53
    • Location: Georgia
    • Status: offline
    Re: B&S Ready Start Conversion 2018/06/16 19:26:49 (permalink)
    0
    What problem are you having with the autochoke?
    MikeNic
    New Member
    • Total Posts : 3
    • Scores: 0
    • Reward points: 0
    • Joined: 2018/06/16 00:51:08
    • Status: offline
    Re: B&S Ready Start Conversion 2018/06/17 12:45:46 (permalink)
    0
    The mower won't start unless it has numerous pulls, sits in the sun for awhile or is manually primed.  Takes about 15 minutes with all of the above to light up.  New plug, timing OK, fresh fuel.   Cleaned carb bowl.
    AVB
    Super Member
    • Total Posts : 729
    • Scores: 31
    • Reward points: 0
    • Joined: 2017/06/21 16:35:48
    • Location: Elora, TN
    • Status: offline
    Re: B&S Ready Start Conversion 2018/06/17 14:15:42 (permalink)
    0
    Have you checked that ready start choke system is correctly setup?
     
    Preform the checks in the following service bulletin. I know its say 120000 series but it should also apply to 110000 series.
    https://drive.google.com/...pKUJnh7QUJOS182MkZBWEE
     
    Also I would need both the model and type numbers to see what would involved in doing a conversion.
    post edited by AVB - 2018/06/17 14:16:50
    MikeNic
    New Member
    • Total Posts : 3
    • Scores: 0
    • Reward points: 0
    • Joined: 2018/06/16 00:51:08
    • Status: offline
    Re: B&S Ready Start Conversion 2018/06/20 13:08:47 (permalink)
    0
    I have checked the auto start/auto choke mechanism and there is a good chance that I don't have it set correctly but I can't find   any info on setting it or making sure it iw s working correctly.  I wish I could find a chart or detailed info.   mike
     
    AVB
    Super Member
    • Total Posts : 729
    • Scores: 31
    • Reward points: 0
    • Joined: 2017/06/21 16:35:48
    • Location: Elora, TN
    • Status: offline
    Re: B&S Ready Start Conversion 2018/06/20 15:43:09 (permalink)
    0
    MikeNic
    I have checked the auto start/auto choke mechanism and there is a good chance that I don't have it set correctly but I can't find   any info on setting it or making sure it iw s working correctly.  I wish I could find a chart or detailed info.   mike

    Since this want to break link to the Service bulletin I sent you a link via PM (private message). Hopefully that will work.
     
     
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC