The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Hot!Toro Z149 - replaced a wheel motor - Wheel turns backwards now

Author
Ballllsss
New Member
  • Total Posts : 1
  • Scores: 0
  • Reward points: 0
  • Joined: 2016/05/20 21:51:37
  • Status: offline
2016/05/20 22:02:35 (permalink)
0

Toro Z149 - replaced a wheel motor - Wheel turns backwards now

I purchased and installed an aftermarket wheel motor (part# 1-523328). 
 
Now, the wheel turns backwards.  Can I fix this?  If so, how?
post edited by Ballllsss - 2016/05/20 23:34:56

3 Replies Related Threads

    gstet1
    Junior Member
    • Total Posts : 18
    • Scores: 2
    • Reward points: 0
    • Joined: 2016/02/05 08:20:38
    • Location: jarrettsville, md
    • Status: offline
    Re: Toro Z149 - replaced a wheel motor - Wheel turns backwards now 2016/05/26 13:20:08 (permalink)
    0
    Hoses are hooked up wrong ??????
    tank48
    New Member
    • Total Posts : 2
    • Scores: 0
    • Reward points: 0
    • Joined: 2016/07/22 21:15:10
    • Status: offline
    Re: Toro Z149 - replaced a wheel motor - Wheel turns backwards now 2016/07/22 21:38:15 (permalink)
    0
    hello...I have a cub cadet m60 tank . the right side hydro pump developed a leak right at fan shaft !  its 1 little round seal in there , but now there telling me that this pump is now obsolete ? also no one I can find has a repair kit for it !  now I might add that this pump works good , its just this that round shaft seal leaks . dealer were I have it says he can replace the pump ( how if its obsolete ?) for 1100.00 plus labor !   the shaft is cub # 02001101  style BDP-12 .  I mic. the shaft and it is 7/16 . now on ebay on seen kits for BDP-10 ,  does anybody have any ideas ?  its a 07 m60 tank 29hp kowasaki
    sure would appreciate any help !   thank you
    Rustys
    Starting Member
    • Total Posts : 13
    • Scores: 0
    • Reward points: 0
    • Joined: 2017/05/10 23:11:30
    • Status: offline
    Re: Toro Z149 - replaced a wheel motor - Wheel turns backwards now 2017/05/11 22:31:00 (permalink)
    0
    The pump is most likely made by Hydro Gear. Look for the sticker with the model number on the pump. Those seals are readily available.
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC