Join us now!

Username
Password
Verification
	Stay logged in

- OR -

Forgot Your Password? Forgot your Username? Haven't received registration validation E-mail?

User Control Panel Log out

Community Stats

1 day 7 days 30 days Max. View More

Birthdays

2021/04/03 10:41:28

comet424

EarthQuake Rear Tiller Replacement Belt Alternative options?

hi i have an rear tine tiller by earth quake
the belts need replacing its its very hard to get in canada.. and the
ardisam only sell the 1 belt

here is the link to the parts page..
do you guys know alternatives
Ardisam Inc.

guess the 1 belt is
10MM X 812MM TOOTH but i dunno the other?

6 comments Leave a comment

AVB

If you got model linked then
The reverse belt is 10MM x 812mm Tooth belt PN 24995
and forward belt is 12MM x 660 MM Tooth belt PN 22773 superseded to 31315

You can also go through https://www.altapower.com/ but shipping is a little ridiculous.

2021/04/03 13:00:52

comet424

oh ok ill check it out
ya my model is 29409/29702
if i known these belts are like this i wouldnt have bought this.. belt only lasted 1 summer of not that much use
i deal with TSCstores or Princess Auto here in canada for belts
would any of those work if you see there site? and who does millimeters for belts? and can regular belt be used like from pics one is reversed

and least you found the other belt.. when you look at the page it skips the number

2021/04/03 13:29:24

AVB

comet424
oh ok ill check it out
ya my model is 29409/29702
if i known these belts are like this i wouldnt have bought this.. belt only lasted 1 summer of not that much use
i deal with TSCstores or Princess Auto here in canada for belts
would any of those work if you see there site? and who does millimeters for belts? and can regular belt be used like from pics one is reversed

and least you found the other belt.. when you look at the page it skips the number

Just got to at the previous year model.

the 4L should be a 1/2" x 26"
the 3L should be a 3/8" x 32"

if conversion from mm to inches is right.

Belts are making pretty tight turns if they are anything like the 7055 I working here.

2021/04/03 13:59:08

comet424

is that the purpose of the belt being notched like a saw teeth because they are making tight turns?
so regular cavlar belt no good? or ha to be the saw tooth blades
as its not cost effective if i blowing a belt eac season

guess why the hondas are better they use double belts to drive it in one direction and the belts i never changed in 30 yrs just the engine finally gave up

2021/04/04 10:26:55

AVB

From what I can find out the 4L is fractional HP belt (under 1 HP rating) what you are wanting to go with would be an AX24 (1/2 x 26) cogged belt. It should give a lot better life over the 4L (1/2 x 26)cogged belt. AX is still a polyester reinforced belt but is rated for higher HP ratings that Earthquake tiller has.

2021/04/04 11:15:16

comet424

ah ok so a fractional belt thats jsut the V shape right?
and cogged is the teeth?
Innoda Light-Duty V-Belt Canadian Tire
thats the fractional well what i did was a i googled the ax24

and is the ax24 for the forward or reverses belt? forward is broken and i noticed for reverse they use a bar that sometimes jams into the belt teeth i guess thats to stop it from going in reverse..

but is the ax24 the forward belt? and can i goto a TSC or a lawn mower place with that?

and this metric stuff who does that 800mm or so frig

2021/04/06 09:44:19

- OR -

EarthQuake Rear Tiller Replacement Belt Alternative options?

Comments are closed.