The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Hot!Kohler 2.25MBM25 with 5hp B&S Engine

Author
bigdaddy0442
New Member
  • Total Posts : 5
  • Scores: 0
  • Reward points: 0
  • Joined: 2024/05/08 22:41:32
  • Status: offline
2024/05/08 23:19:37 (permalink)
0

Kohler 2.25MBM25 with 5hp B&S Engine

I have a Kohler 2.25MBM25 generator with a 5hp Briggs & Stratton engine.  The engine fires with one pull as long as I prime the carburator with gas.  As soon as the primer gas is burned out it dies.  Before I take it to a repair shop and they charge me an arm and leg just to tell me it was something simple, I would really appreciate any troubleshooting ideas?
 
Thanks in advance!
Mike

9 Replies Related Threads

    SRTsFZ6
    Super Member
    • Total Posts : 2063
    • Scores: 74
    • Reward points: 0
    • Joined: 2018/11/18 07:20:58
    • Status: offline
    Re: Kohler 2.25MBM25 with 5hp B&S Engine 2024/05/09 07:36:17 (permalink)
    0
    You obviously have a fueling issue..
     
    If you can post the model # of the ENGINE (which is the problem)
    would help with the repair as we don't know what style carb you have.
     
    .

    Scott
    bigdaddy0442
    New Member
    • Total Posts : 5
    • Scores: 0
    • Reward points: 0
    • Joined: 2024/05/08 22:41:32
    • Status: offline
    Re: Kohler 2.25MBM25 with 5hp B&S Engine 2024/05/09 16:53:18 (permalink)
    0
    I had to go back to Dallas so it will be next week before I can pull the model number off the engine.

    Thanks for your response. I’ll be back with the information asap.
    bigdaddy0442
    New Member
    • Total Posts : 5
    • Scores: 0
    • Reward points: 0
    • Joined: 2024/05/08 22:41:32
    • Status: offline
    Re: Kohler 2.25MBM25 with 5hp B&S Engine 2024/05/18 22:07:21 (permalink)
    0
    Couldn’t find model number so I took a picture.
    SRTsFZ6
    Super Member
    • Total Posts : 2063
    • Scores: 74
    • Reward points: 0
    • Joined: 2018/11/18 07:20:58
    • Status: offline
    Re: Kohler 2.25MBM25 with 5hp B&S Engine 2024/05/19 07:36:21 (permalink)
    0
    No pic's posted

    Scott
    bigdaddy0442
    New Member
    • Total Posts : 5
    • Scores: 0
    • Reward points: 0
    • Joined: 2024/05/08 22:41:32
    • Status: offline
    Re: Kohler 2.25MBM25 with 5hp B&S Engine 2024/05/22 13:06:15 (permalink)
    0
    I have been trying for over Four days to upload a photo. It gets to 69% and stalls. Any ideas on what I’m doing wrong?
    Mikel1
    Moderator
    • Total Posts : 1170
    • Scores: 41
    • Reward points: 1
    • Joined: 2016/04/14 18:48:53
    • Location: Georgia
    • Status: offline
    Re: Kohler 2.25MBM25 with 5hp B&S Engine 2024/05/22 17:56:51 (permalink)
    0
    From phone or computer? Large file? If a large file have you tried resizing it to make it smaller? I tried a picture out of my phone, loaded in a few seconds. So am interested to know
    SRTsFZ6
    Super Member
    • Total Posts : 2063
    • Scores: 74
    • Reward points: 0
    • Joined: 2018/11/18 07:20:58
    • Status: offline
    Re: Kohler 2.25MBM25 with 5hp B&S Engine 2024/05/22 18:35:45 (permalink)
    0
    Go to "Postimages" (  https://postimg.cc/files  )  and open a free acct. Upload your pic's there, then use the "forum" link to copy and paste the full size pic here. 
     
    IE:

     

    Scott
    SRTsFZ6
    Super Member
    • Total Posts : 2063
    • Scores: 74
    • Reward points: 0
    • Joined: 2018/11/18 07:20:58
    • Status: offline
    Re: Kohler 2.25MBM25 with 5hp B&S Engine 2024/05/22 18:36:55 (permalink)
    0
    Go to "Postimages" (  https://postimg.cc/files  )  and open a free acct. Upload your pic's there, then use the "forum" link to copy and paste the full size pic here. 
     
    The pic will have to be approved for it to post / show (from the moderator).
     
     
    Does your engine have a float bowl or a diaphram (flat plate with 4-5 screws holding it on the gas cap side)?
     
    .
    post edited by SRTsFZ6 - 2024/05/22 18:38:54

    Scott
    bigdaddy0442
    New Member
    • Total Posts : 5
    • Scores: 0
    • Reward points: 0
    • Joined: 2024/05/08 22:41:32
    • Status: offline
    Re: Kohler 2.25MBM25 with 5hp B&S Engine 2024/05/23 15:40:32 (permalink)
    0
    Due to my frustration I re-rebuilt the carb again. Someone on the forum in another post said check for air leaks around the carb. Sure enough the gas drop tube in the tank had split so I replaced it with a new fuel line and filter and it started working fine.

    Thanks for all the help.

    I found the model number: 130232. Type 183901.

    They had been painted over and the paint had filled in the die stamp

    Thanks again.
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC
    © 2025 APG vNext Trial Version 5.5