The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Fuel Line Briggs Intek V-Twin

Author
Post
Essentials Only Full Version
Steverino
Starting Member
  • Total Posts : 6
  • Scores: 0
  • Reward points: 0
  • Joined: 2025/02/02 13:14:36
  • Location: Illinois
  • Status: offline
2025/02/14 16:34:29 (permalink)
0

Fuel Line Briggs Intek V-Twin

Previously posted a question on replacing all fuel line on a Briggs Intek V-Twin 25HP on our JD 155C tractor. Decided NOT to go with Tygon.  Anyway, the tractor's up in Michigan and will be doing this in April.
 
Hence the the "dumb" question:  If I'm right, correct size used in this application is 1/4" ID x 1/2" OD?   The only problem I could run into is a sharp bend where the line comes out of the pickup tube at the tank.
 
(Would like to have the line in hand before I head up North since there's no place to buy cut lgths bulk up there.  10ft max is more than enough)
 
Thanks!
Quote  #1

2 Replies Related Threads
    SRTsFZ6
    Super Member
    • Total Posts : 2031
    • Scores: 74
    • Reward points: 0
    • Joined: 2018/11/18 07:20:58
    • Status: offline
    Re: Fuel Line Briggs Intek V-Twin 2025/02/15 07:21:16 (permalink)
    0
    If 5/16" hose fits, I'd use that.
     
    A for the turn:
    https://www.amazon.com/JUWO-Degree-Fitting-Clamps-Included/dp/B0BW989L7G?dib=eyJ2IjoiMSJ9.qIZkOcGJ9DdgghMqDlkAveQ18t-gCrdWrDave0k3hoSjpNjmuNCpPbBTUKizBeqmgveDvdlppJ_umyFuAp_HqlXY1bze0N8G-gpqwi5djO9mLgLkqrKgptv-mJfQxCA0_m1vS3oD4h4DmHDcb46cISAY-9BBh_beYCFYHJ3-tuPCmp5EBaCHfPSjJMsuEVD_a0yWkJxMo_yOmMjZYuTmfHbYxxEYuUgZeo94DvOCnYU.5D5uK-YmfMt33qq-hUOGH0eZJyJVJO389u1ho_q7-GY&dib_tag=se&keywords=90%2Bdegree%2Bfuel%2Bfitting&qid=1739625561&sr=8-3&th=1
     

    Attached Image(s)


    Scott
    Quote  #2
    Steverino
    Starting Member
    • Total Posts : 6
    • Scores: 0
    • Reward points: 0
    • Joined: 2025/02/02 13:14:36
    • Location: Illinois
    • Status: offline
    Re: Fuel Line Briggs Intek V-Twin 2025/02/17 11:55:24 (permalink)
    0
    Not a bad idea Scott.  Will be adding an inline fuel shutoff as well.  Just need to determine the best location when the time comes.
    Quote  #3
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC
    © 2025 APG vNext Trial Version 5.5