The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Kohler CV23S One Cylinder Backfires

Author
Post
Essentials Only Full Version
Backfired
New Member
  • Total Posts : 2
  • Scores: 0
  • Reward points: 0
  • Joined: 2025/04/07 10:38:13
  • Status: offline
2025/04/07 11:47:04 (permalink)
0

Kohler CV23S One Cylinder Backfires

I own a Wright Sentar mower with a Kohler CV23S engine that has 840 run hours on it. Three weeks ago it was running fine, suddenly the engine RPM dropped, and it began to backfire, blowing black smoke out of the muffler. I installed a new gas filter and spark plugs. Both cylinders show a strong spark and seem to be getting gas but only the one by the fuel pump seems to have any power. The other cylinder backfires with every spark, blowing black smoke out of the muffler. I need help determining what the problem is. Has anyone had a similar problem, and how did you fix it?
Thanks.
Quote  #1

3 Replies Related Threads
    SRTsFZ6
    Super Member
    • Total Posts : 2073
    • Scores: 74
    • Reward points: 0
    • Joined: 2018/11/18 07:20:58
    • Status: offline
    Re: Kohler CV23S One Cylinder Backfires 2025/04/07 14:32:41 (permalink)
    0
    How does the spark plug look on the "bad" cylinder, black and sooty?
     
    .

    Scott
    Quote  #2
    Backfired
    New Member
    • Total Posts : 2
    • Scores: 0
    • Reward points: 0
    • Joined: 2025/04/07 10:38:13
    • Status: offline
    Re: Kohler CV23S One Cylinder Backfires 2025/04/08 10:00:20 (permalink)
    0
    I changed oil, filters, and plugs earlier this spring just before the problems started so the plugs on both cylinders have little run time on them and both look pretty clean.
    Quote  #3
    SRTsFZ6
    Super Member
    • Total Posts : 2073
    • Scores: 74
    • Reward points: 0
    • Joined: 2018/11/18 07:20:58
    • Status: offline
    Re: Kohler CV23S One Cylinder Backfires 2025/04/08 17:00:55 (permalink)
    0
    Black smoke is excess fuel going thru that cylinder. Low compression
    in that cylinder would hamper combustion. 
     
    You may want to check valve clearances..
     
    You need to check compression on both cylinders but even better
    a "Leak Down" test.  
     
    This will determine the health of the engine, rings, valves and more
    importantly, the HEAD GASKET (may be blown)..
     
    .
    post edited by SRTsFZ6 - 2025/04/08 17:05:08

    Scott
    Quote  #4
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC
    © 2025 APG vNext Trial Version 5.5