The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Helpful ReplyHot!Oil is not getting to the chain and bar, may be clogged.

Page: < 12 Showing page 2 of 2 - Powered by APG vNext Trial
Author
Post
Essentials Only Full Version
widucl
Starting Member
  • Total Posts : 12
  • Scores: 0
  • Reward points: 0
  • Joined: 2025/08/18 22:13:44
  • Status: offline
Re: Oil is not getting to the chain and bar, may be clogged. 2025/08/21 18:26:58 (permalink)
0
I tore it all the way down.,
No oil pump
 
Duane
Quote  #21
SRTsFZ6
Super Member
  • Total Posts : 2478
  • Scores: 80
  • Reward points: 0
  • Joined: 2018/11/18 07:20:58
  • Status: offline
Re: Oil is not getting to the chain and bar, may be clogged. 2025/08/21 19:54:02 (permalink)
0
widucl
I tore it all the way down.,
No oil pump
 
Duane

widucl
I tore it all the way down.,
No oil pump
 
Duane



You typed this earlier:
 
Quote: 
There were 2 hoses or tubes, one from the tank to a small pump and one from the pump to the outlet
near the bar/chain.
The hose to the pump had come off and there was oil everywhere.
 
End quote...
 
I can't follow what's going on, your posting two complexly different things...
Advise...
 
 
.

Scott
Quote  #22
widucl
Starting Member
  • Total Posts : 12
  • Scores: 0
  • Reward points: 0
  • Joined: 2025/08/18 22:13:44
  • Status: offline
Re: Oil is not getting to the chain and bar, may be clogged. 2025/08/21 20:45:17 (permalink)
0
There is no pump. I guess I was the only one that said there was a pump.
 
I am unable to sent photos because they are too big.
 
Anyway the saw runs ver good, new chain and I will manually lube the chain when necessary'
 
Thank you very much for all your help.
 
Duane Clark
Quote  #23
Page: < 12 Showing page 2 of 2 - Powered by APG vNext Trial
Jump to:
Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC
© 2025 APG vNext Trial Version 5.5