Question regarding wiring of Husqvarna RZ5424

Thank you Scott!   I've printed out the diagram and will see if it's a match. On the wiring diagram, I'm looking for the "right and left" control lever wiring, but don't see it.  Maybe I'm missing something.  I'll also try to confirm the wiring harness as one that would fit my rig. Thank you very much for your time researching this.    As to your question... I've been as confused as you've indicated you may be.  Yes, the pulley is below the deck, and the wires were located under the seat, IN FRONT OF the battery, above the deck!   As the pulley was in the process of freezing up, I smelled a burnt plastic smell, which I thought was the plastic part of the pulley.    When I tilted up the seat and accessed the wires, they looked like they had been "sliced," and I'm at a loss as to how they would have been cut, being directly IN FRONT of the battery!  I thought I'd find a junction box there, but not so. I'm wondering if they burned through, although the plastic on the wires wasn't melted... just the wires looking like they were cut.  This has truly been an enigma to me as to how it happened to impact the wires.  If it has been only the pulley to repair, that was easy to fix with a new part, but not so!  These things seem to happen to me, without explanation or reason, they just happen.  In any case, I'll check further into the diagram you found and see if it looks like anything similar to what I have.  
 
Thank you once again. 

captainjohn
AVB,  Another thank you... I've written down the 9 digit model number and will access the Husqvarna website (when it's working), to see if the wiring harness that Townsends FJR 1300 supplied will work.  The two of you have been MORE than helpful.  Respectfully,  CaptainJohn

It won't since it for a rider but here a diagram I pull from one of the RZ5424 owners manuals this morning.