The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Promart 310 brush chipper with Kohler Engine: Needs Carb kit or diagram (#4805306)

Author
beebad
Junior Member
  • Total Posts : 20
  • Scores: 0
  • Reward points: 0
  • Joined: 2024/09/27 17:13:16
  • Status: offline
2024/09/27 17:41:45 (permalink)
0

Promart 310 brush chipper with Kohler Engine: Needs Carb kit or diagram (#4805306)

I knew that the carb would be the last piece of the puzzle to get our chipper back on line!!!
 
The chipper started momentarily then stopped. I looked at the carb and there was a a fuel leak coming from the bowl. 
 
The carb needs to be cleaned or rebuilt. This is the number on the body: #4805306
 
This Kohler engine has two cylinders and what appears to be a manifold that feeds them?
 
Where do I find engine info on the engine so I can find a diagram or more info....Any ideas Thank in advance.
 
 
post edited by beebad - 2024/09/27 22:47:45

Attached Image(s)

3 Replies Related Threads

    SRTsFZ6
    Super Member
    • Total Posts : 2073
    • Scores: 74
    • Reward points: 0
    • Joined: 2018/11/18 07:20:58
    • Status: offline
    Re: Promart 310 brush chipper with Kohler Engine: Needs Carb kit or diagram (#4805306) 2024/10/23 16:29:17 (permalink)
    0
    You can buy a new one for fairly cheap(OEM):
    https://isavetractors.com/carburetor-for-kohler-k582-engine-4805306s/ 
     
    If you post the FULL model #, we can find the exact parts diagram for your engine/carb:
    https://jackssmallengines.com/jacks-parts-lookup/manufacturer/kohler/k-series-k91-662-kt17-21/k582 
     
    It sounds as if your float needle is stuck open.  Once accessed and removed, I clean the seat with several Q tips, cut down and placed in a drill.  A little metal polish and it'll be like new.  A little on the needle won't hurt either.
     
    Not likely but check the float itself, that it's not leaking and full of fuel.  This would also cause problems.
     
    .

    Scott
    beebad
    Junior Member
    • Total Posts : 20
    • Scores: 0
    • Reward points: 0
    • Joined: 2024/09/27 17:13:16
    • Status: offline
    Re: Promart 310 brush chipper with Kohler Engine: Needs Carb kit or diagram (#4805306) 2024/10/23 17:43:40 (permalink)
    0
    SRTsFZ6
    You can buy a new one for fairly cheap(OEM):
    https://isavetractors.com/carburetor-for-kohler-k582-engine-4805306s/ 
     
    If you post the FULL model #, we can find the exact parts diagram for your engine/carb:
    https://jackssmallengines.com/jacks-parts-lookup/manufacturer/kohler/k-series-k91-662-kt17-21/k582 
     
    It sounds as if your float needle is stuck open.  Once accessed and removed, I clean the seat with several Q tips, cut down and placed in a drill.  A little metal polish and it'll be like new.  A little on the needle won't hurt either.
     
    Not likely but check the float itself, that it's not leaking and full of fuel.  This would also cause problems.
     
    .


    Thanks! They do not make or have any OEM carbs out there to be found, except one on ebay for $275 four weeks ago.


    The carb from isavetractors for $75 and every other aftermarket carb for this K582 engine, come from the same factory or source in China. This includes the same carb I got on amazon for $24.
     
    The problem with our chipper was Don Flanders, a hack who worked on our property and ruined almost everything he touched. The main jet was mangled, looked like he used a phillips to remove it instead of a slotted. The main needle was bent as in over tightened. 
     
    It started right up when I installed it but heard a big vacuum leak; it was running on one cylinder-blown head gasket 1160rpms. After replacing the head gasket, i gained 1000 rpms at 2280-2300 rpms……
     
    this thing is like brand new now. Really amazing! I had pictures but too hard to resize and post . Thanks for responding!
    post edited by beebad - 2024/10/23 17:47:03
    SRTsFZ6
    Super Member
    • Total Posts : 2073
    • Scores: 74
    • Reward points: 0
    • Joined: 2018/11/18 07:20:58
    • Status: offline
    Re: Promart 310 brush chipper with Kohler Engine: Needs Carb kit or diagram (#4805306) 2024/10/23 17:58:45 (permalink)
    0
    Glad you got it going!
     
    .

    Scott
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC
    © 2025 APG vNext Trial Version 5.5