help with govenor spring
i just got a kubota T1460 runs good but was missing the govenor spring when i got it...the motor was a 12hp but was changed over the years to a "briggs&stratton intek 17.5..family#7BSXS.5012VP 277332......another number on it says....071018ZD03720...and there are no other numbers on the motor..was told that there was an id plate above the ohv valve cover but as u can see in pictures thats not my case. so with the pictures and this info can u help me figure out the part number i need for the center sping that hooks to the throttle plate? "i do-not need the to spring to the carb" was also told that these springs are different on each motor so i have to get right one. pictures i have are below please let me kno if u need any other info to help? thnx bb[image]file:///C:/Users/Troy/OneDrive/Desktop/b&s9.jpg[/image][image]file:///C:/Users/Troy/OneDrive/Desktop/b&s8.jpg[/image]hey sorry about pix im also going to try and put in gallery[image]file:///C:/Users/Troy/OneDrive/Desktop/b&s6.jpg[/image][image]file:///C:/Users/Troy/OneDrive/Desktop/b&s4.jpg[/image][image]file:///C:/Users/Troy/OneDrive/Desktop/b&s3.jpg[/image][image]file:///C:/Users/Troy/OneDrive/Desktop/b&s2.jpg[/image][image]file:///C:/Users/Troy/OneDrive/Desktop/b&s.jpg[/image]