The Jack's Small Engines Forum - Join Our Online Community
Jacks Small Engines Lawn Mower & Power Equipment Forums
Reply to post

Generac 4400EXL Choke

Author
Post
Essentials Only Full Version
kycats75
New Member
  • Total Posts : 2
  • Scores: 0
  • Reward points: 0
  • Joined: 2017/12/09 14:36:40
  • Status: offline
2017/12/09 14:40:39 (permalink)
0

Generac 4400EXL Choke

The good news about my Generac 4400EXL is that I can work on it myself. The bad news is that I constanty have to.
 
Went to do my monthly start-up test and noticed that the choke lever is no longer attached to anything. I assume that there is a linkage part to the carb, but neither Generac nor Briggs Stratton could find a part for me. Does anyone know the part name or number?
 
Thanks.
 
 
Quote  #1

6 Replies Related Threads
    AVB
    Super Member
    • Total Posts : 2165
    • Scores: 87
    • Reward points: 0
    • Joined: 2017/06/21 16:35:48
    • Location: Elora, TN
    • Status: offline
    Re: Generac 4400EXL Choke 2017/12/09 15:33:17 (permalink)
    0
    In order to look-up parts for the engine I would need the make, model, and spec numbers. I fairly sure it will either a Generac or Briggs engine.
    Quote  #2
    kycats75
    New Member
    • Total Posts : 2
    • Scores: 0
    • Reward points: 0
    • Joined: 2017/12/09 14:36:40
    • Status: offline
    Re: Generac 4400EXL Choke 2017/12/10 10:22:09 (permalink)
    0
    It’s a Generac 4000EXL. Generac customer service told me it was built by Briggs & Stratton, but Briggs couldn’t identify the model by any of the markings I read off the motor.  They are as follows (from the B&S engine):
     
    Engine ID: 0042760EHC
    216 cc
    Serial No. 1424243
    Model: 01645
    Rev 00
    Serial No. 1009099880
    120/240 VAC
    33.3/16.7 AC amps
    4,000 watts AC
     
    Thanks.
     
    Quote  #3
    AVB
    Super Member
    • Total Posts : 2165
    • Scores: 87
    • Reward points: 0
    • Joined: 2017/06/21 16:35:48
    • Location: Elora, TN
    • Status: offline
    Re: Generac 4400EXL Choke 2017/12/10 11:09:46 (permalink)
    0
    It is a Generac engine and not a Briggs per the model id given. It was produce before Briggs purchased Generac.
     
    Model 0042760EHC > EHC04276
    You would use the GN220 service manual for this engine.
     
    For parts look-up go https://www.searspartsdirect.com/model-number/ehc04276/0430/1503500.html
    (For some reason this site is longer working with Firefox so use Microsoft Internet Explorer)
     
    According the to IPL the choke lever is part of the carburetor. Physically attached [Pinged] to choke vane shaft.
    Replacement carburetor is part number 0C1535ASRV.
     
    There is one linkage but goes to the governor arm to the throttle plate assembly.
    post edited by AVB - 2017/12/10 11:11:07
    Quote  #4
    AVB
    Super Member
    • Total Posts : 2165
    • Scores: 87
    • Reward points: 0
    • Joined: 2017/06/21 16:35:48
    • Location: Elora, TN
    • Status: offline
    Re: Generac 4400EXL Choke 2017/12/10 11:33:59 (permalink)
    0
    Found an image of the carburetor with choke.

     
    Edit to add correct file location. Deleted previous file by accident.

    post edited by AVB - 2017/12/10 13:21:29
    Quote  #5
    Roy
    Moderator
    • Total Posts : 1503
    • Scores: 31
    • Reward points: 1
    • Joined: 2016/07/27 22:51:23
    • Location: British Columbia
    • Status: offline
    Re: Generac 4400EXL Choke 2017/12/10 11:56:52 (permalink)
    0
    The image doesn't show
    Quote  #6
    AVB
    Super Member
    • Total Posts : 2165
    • Scores: 87
    • Reward points: 0
    • Joined: 2017/06/21 16:35:48
    • Location: Elora, TN
    • Status: offline
    Re: Generac 4400EXL Choke 2017/12/10 13:16:13 (permalink)
    0
    Sorry about that deleted the wrong one from the server.

    Quote  #7
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC
    © 2025 APG vNext Trial Version 5.5