The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Need headlight lens for older Yard Machines Mower

Author
Post
Essentials Only Full Version
guzda53
New Member
  • Total Posts : 3
  • Scores: 0
  • Reward points: 0
  • Joined: 2020/07/09 10:02:14
  • Status: offline
2020/07/09 10:12:46 (permalink)
0

Need headlight lens for older Yard Machines Mower

Hi,
 I need help locating a plastic headlight lens for my Yard Machines mower, Model 13AK673G088.
Lens in my book is  Pt # 731-1503A. Apparently changed to 75306310.
 
The lens that I need should be relatively inexpensive. The new number appears to be a kit for $106+ 40+ shipping!
 
I need a lens, not a whole hood. Anyone able to help? Can't put $150 in a $200 mower!
 
Thanks in advance.
guzda53
Quote  #1

3 Replies Related Threads
    AVB
    Super Member
    • Total Posts : 2165
    • Scores: 87
    • Reward points: 0
    • Joined: 2017/06/21 16:35:48
    • Location: Elora, TN
    • Status: offline
    Re: Need headlight lens for older Yard Machines Mower 2020/07/09 13:07:18 (permalink)
    0
    Ahhh I see what they trying to do to you. That is to sell the whole front cap (grill). The plastic lens itself is PN 731-06042.
     
    The whole front cap (grill) would be a slight longer PN as the color must be specified.
     
    PN 731-06042 is shown on Amazon for 23.99 including shipping.
    https://www.amazon.com/MTD-731-06042-Lens-2-Style/dp/B0017KEKPI
     
    Quote  #2
    guzda53
    New Member
    • Total Posts : 3
    • Scores: 0
    • Reward points: 0
    • Joined: 2020/07/09 10:02:14
    • Status: offline
    Re: Need headlight lens for older Yard Machines Mower 2020/07/09 13:26:41 (permalink)
    0
    Thank you,Sir. I placed the order.
    Quote  #3
    guzda53
    New Member
    • Total Posts : 3
    • Scores: 0
    • Reward points: 0
    • Joined: 2020/07/09 10:02:14
    • Status: offline
    Re: Need headlight lens for older Yard Machines Mower 2020/07/15 09:40:24 (permalink)
    0
    I received the lens and it was the proper size. However, it had snap in tabs to hold it in whereas mine was made to attach with screws. I removed the tabs with a Dremel tool and used silicone sealer to glue it on. Worked well! Thank you!
    Quote  #4
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC
    © 2025 APG vNext Trial Version 5.5