The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Briggs 22hp intel - 2017 model 44n677 type 0005G1

Author
Post
Essentials Only Full Version
Sguin
New Member
  • Total Posts : 4
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/01/12 16:45:40
  • Status: offline
2019/01/12 17:05:21 (permalink)
0

Briggs 22hp intel - 2017 model 44n677 type 0005G1

Husqvarna giving problems starting. Engine turning over, not cranking. Confirmed: air filter, fuel lines, fuel filter to be working fine. Have taken old gas out, verified plugs w/ spark, bought 2 new spark plugs. When spraying starter fluid in carb, cranks and rides like a charm until I am ready to turn it off. I have tried to crank the next day after using starter fluid, but same problem persists. Any help with this would be great!
Quote  #1

6 Replies Related Threads
    AVB
    Super Member
    • Total Posts : 756
    • Scores: 33
    • Reward points: 0
    • Joined: 2017/06/21 16:35:48
    • Location: Elora, TN
    • Status: offline
    Re: Briggs 22hp intel - 2017 model 44n677 type 0005G1 2019/01/12 17:19:32 (permalink)
    0
    Verify that the choke is closing.
    Quote  #2
    Sguin
    New Member
    • Total Posts : 4
    • Scores: 0
    • Reward points: 0
    • Joined: 2019/01/12 16:45:40
    • Status: offline
    Re: Briggs 22hp intel - 2017 model 44n677 type 0005G1 2019/01/12 17:25:47 (permalink)
    0
    Verified throttle @ carburetor is working, is that the correct way to check this?
    Quote  #3
    AVB
    Super Member
    • Total Posts : 756
    • Scores: 33
    • Reward points: 0
    • Joined: 2017/06/21 16:35:48
    • Location: Elora, TN
    • Status: offline
    Re: Briggs 22hp intel - 2017 model 44n677 type 0005G1 2019/01/12 17:40:08 (permalink)
    0
    This engine had both a throttle vane and a choke vane. The choke must close fully when the throttle lever is at max position, unless, this engine has a separate choke control. If so then it must fully close the choke vane. If I am right this engine the throttle bracket also controls the choke closure.
     
    You can also try hand choking the carburetor while trying to start to verify that this a choking problem.
    Quote  #4
    Sguin
    New Member
    • Total Posts : 4
    • Scores: 0
    • Reward points: 0
    • Joined: 2019/01/12 16:45:40
    • Status: offline
    Re: Briggs 22hp intel - 2017 model 44n677 type 0005G1 2019/01/13 09:14:54 (permalink)
    0
    If it is choking problem, how to correct issue?
    Quote  #5
    Roy
    Moderator
    • Total Posts : 565
    • Scores: 15
    • Reward points: 1
    • Joined: 2016/07/27 22:51:23
    • Location: British Columbia
    • Status: offline
    Re: Briggs 22hp intel - 2017 model 44n677 type 0005G1 2019/01/13 15:22:25 (permalink)
    0
    Lossen the cable clamp. With the throttle control advanced as far as it will go move the cable back as far as it will go and retighten the clamp.
    Quote  #6
    Sguin
    New Member
    • Total Posts : 4
    • Scores: 0
    • Reward points: 0
    • Joined: 2019/01/12 16:45:40
    • Status: offline
    Re: Briggs 22hp intel - 2017 model 44n677 type 0005G1 2019/01/15 20:52:51 (permalink)
    0
    Finally got around to trying to adjust the choke cable and it worked like a charm. Much thanks for your help!
    Quote  #7
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC