The Jack's Small Engines Forum - Join Our Online Community
Reply to post

Hot!INGERSOLL RAND P1IU-A9 won't turn on

Author
rye
Starting Member
  • Total Posts : 6
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/07/11 17:47:30
  • Status: offline
2019/08/09 17:30:39 (permalink)
0

INGERSOLL RAND P1IU-A9 won't turn on

     I've had my IR mini stack compressor for about 4 years now with nothing, but good things to say. Recently, though, I flipped the lever to turn it on and it made an electrical noise that tappered off then nothing. Now there is no noise when turning it on and the motor won't turn on. The switch has 120v going in and 120v coming out. Is it possible that a valve is not opening making the motor think that the compressor is full? 

1 Reply Related Threads

    AVB
    Super Member
    • Total Posts : 1730
    • Scores: 65
    • Reward points: 0
    • Joined: 2017/06/21 16:35:48
    • Location: Elora, TN
    • Status: offline
    Re: INGERSOLL RAND P1IU-A9 won't turn on 2019/08/09 19:16:11 (permalink)
    0
    The pressure relay that you are turning on it the only switching device. If the output to the motor is 120 vac (110-130) then the motor has failed.  Connect another load to the relay to verify that it is indeed working as the contacts could be badly burned.
    Jump to:
    Copyright © 1994 - 2016 Jacks Small Engine & Generator Service, LLC