Hi
I jave a Ryobi leaf blower that refuses to start

I have
Fitted new carb snd coil
Removed ground kill wire
Good spark and fuel getting through
Compression 100 psi
No blockage in fuel lines
Tried different settings on high and low jets

Just still will not start

Any ideas before i bin it

If it has a spark arrestor make sure it’s clean. Tried another spark plug?

Model #???

Model is RBV26

OK So i cleaned the spark arrestor and tried a new plug
 
Def go a spark and when i take plug out it is wet so clearly getting fuel through
 
Also tried spraying carb cleaner into the inlet and still nothing
 
I am nearly ready to throw it in the bin but would welcome any ideas before I do

Check your flywheel to crank key way.
I believe it's part of the flywheel and if slightly off, it won't run.
 
Also check the tightness of the cylinder to block bolts(2).
They do tend to loosen and cause a MAJOR air leak.. 
You'll see dampness in the area if it's leaking

Thanks checked block bolts and flywheel and all OK
Reckon its for the bin-fed up with it !!!!!!!!!!!!!