Howdy Everyone,

My Honda Versattach UMC435 got dropped on the power head and a plastic part came off. The power head no longer will idle. It either has to have the trigger pressed to run or it bogs and dies when RPMs get low enough. I was not the one using it when it was dropped so I have no idea where the broken piece came from.

I’m guessing it was somewhere near where the throttle line enters the power head/carb, but I can’t clearly see where anything looks broken off. I’ve attached photos of the broken part and the powerhead. I’d be extremely grateful if someone could tell me what part I broke or what replacement part I need to buy.

Anyone know what’s broken based on the attached pictures?

Much thanks in advance!!

Trying to upload photos…looks like I can’t do it from my phone.

For some reason it's not letting me upload photos to this forum.  I uploaded them to a free photo hosting platform.  The hyperlinks to the pictures are below.  Again, much thanks in advance for your help everyone.  I'd be very grateful to anyone that can help me figure out what this darn part is!
 
Broken Part Pictures





 
Powerhead Pictures




 
Thanks!
 
-Colin

Picture 1

Picture 2

Picture 3

Sign up for "Post image", (it's free).  https://postimg.cc/files 
 
Up load you pic's to the site, then use the hot link for "forums".
Pic's will post here, IE

 
Circle or point to what area is broke, or show the broke part..
 
.
 
 

I think, with that screw, it's probably part of the carb.  
 
The screw is the idle stop screw.  When you close the throttle,  that screw is turned in or outward to adjust the idle higher or lower.. It literally touches the moving throttle when the throttle is released...
 
 
.

Bottom left corner of the attached picture is where your broken part(I believe) came from.
 
.

Bottom left corner of the picture is your part