Repair Q & A

Repair Q & A (p.5)
Post New Thread
Regular
Mower man 23

Compatible replacement fuel tank

Hello, I'm working on a husqvarna Yth2148c riding mower and the plastic fuel tank has some cracks in it. Is there a plastic tank repair that will withstand gas with or without ethanol? Or is there a suitable tank that can be swapped in place of the oe one as that tank has been discontinued. I wo..
8
2024/03/26 19:28:12
Jcaldwell89

Stumped on No start

I have a quantum xe 6hp briggs and stratton motor on a log splitter that I acquired. It looks to have been sitting outside for its entire life. I have tried starring this engine over and over with no luck. The items I have tried are follows.... - one new carb/ rebuild the old one - Replaced all sea..
3
2024/02/01 08:48:44
Widget

I'm stumped. Walbro WA59 Carb rebuilding?

Hi guys, I have a Walbro 59 (stamped in the carburetor), I'm putting it back together from pictures. I have a picture, not the greatest, despite being large, but it shows what appears to be some sort of 'plug' or 'cover' over one of the ports. I can't recall removing it, nor can I find it among all ..

2024/01/05 07:24:34
Rathmellrg

Main jet clean still dies

I have a log splitter with this engine. 12H702-1717-81 I have cleaned the carb many times, thoroughly cleaned the main jet, it is not clogged. Primer doesn’t seem to work. If I hold a rag over the carb I can get it to stay running. Otherwise it dies in seconds. Considering a new carb. Any ideas?..
1
2023/12/08 16:54:51
Fidler

Porter Cable oscillating tool not vibrating when pressure is put on the blade

PCC710..

2023/11/07 15:22:23
Eejay

420cc Honda clone (190F) generator engine always kicks back when trying to start

This started happening randomly, initially it would kickback 2-4 times before it would eventually turn over and start running, but it ran rough and hot, and started dieseling when shut down However, after giving it a shim head gasket to bump up compression (because I planned on running it on prop..
1
2023/11/04 08:15:21
Eejay

420cc Honda clone (190F) generator engine always kicks back when trying to start

This started happening randomly, initially it would kickback 2-4 times before it would eventually turn over and start running, but it ran rough and hot, and started dieseling when shut down However, after giving it a shim head gasket to bump up compression (because I planned on running it on prop..

2023/11/03 21:10:43
T_Rose_3825

Stihl 461 won't start.

I have a Stihl 461 that is impossible to start! I have replaced the spark plug. I have spark. I have cleaned carb and so far as that I have gas....but my spark plug is never wet. I even took it apart all the way down to the Impulse hose. Still nothing!..
1
2023/10/31 20:03:36
T_Rose_3825

Log splitter pull start stuck!

I have a B&S Quantum XE 6.0 ( engine # 123K02-0238-E1 04081157 ) Model # 24AF55CC729 427385 WITH SERIAL # 1H154H50023. Ok, so I brought it down to split some wood and set it up, checked fluids and then started it. I let it run for say...2 mins....as I took a seat on a log to begin splitting, ..
7
2023/10/31 08:17:54
killerwatt

SEF (Small Engione Fuel) for a Troybilt?

Hi, I have a Troybilt Snowthrower, model 42013. Does anyione knwo what type (2 stage or 4 stage) SEF I should use with this? Thanks in advance!..

2023/10/28 12:39:05

<< ..4 5 6 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account