Repair Q & A

Repair Q & A (p.6)
Post New Thread
Regular
Luc55

Kawasaki FR691v cuts out and stalls

I have an Ariens Ikon XD 60 zero turn with a Kawasaki FR691v CS30 r (more about that later. When sitting still or not cutting, it will run steadily. When we engage the blades, it may run fine for about 20 minutes then start cutting out and then stalls as if it is out of gas. Looking at various forum..
4
2023/10/24 18:52:53
rjjoslin

Kawasaki FR730V Carburetor Replacement - throttle linkage grommet

I am working on putting a new carb on my FR730V. The white plastic grommet that holds the throttle clip for the spring and wire popped out of the hole on the carb. Is there any way to get a replacement? OG carb had a metal, press fit grommet holding the clip...
1
2023/10/15 06:44:37
Jeremywp88

Motor won't shut off

I have a JD la150. First off the motor won't start unless I unhook one the coils. Doesn't matter which one. They both get spark. Runs fine if I have one of them unhooked but when I do that the mower won't shut off when I turn the keyswitch off. I have to cut the gas supply off to cut it ..
2
2023/10/14 17:36:59
Texas

Westinghouse generator

I’ve got a generator that fires right up and runs but it will not power anything Has 2 20 amp breakers and a gfci breaker The vfr shows nothing on the screen. Only the battery indicator lights up. Any help would be greatly appreciated..

2023/10/14 17:33:42
Jerrol

won't start

76 Onan 16 hp case tractor,replaced starter and points,what can I do..
2
2023/10/06 08:15:46
tomcat75

Honda eu3000is inverter generator makes winning noise for about 5 minutes and then generator will fire up

Honda..
3
2023/10/06 08:09:15
Paul6506

Simpson pressure washer issue.

My brand new Simpson 2800psi 2.5gpm pressure washer was used once and after disconnecting the PW hose to the wand some parts fell out when the machine was tipped back onto it roller wheels. After some googling it is a "venturi kit". Part is damaged. Long story short...the part is not find..

2023/09/12 10:51:03
maimino

Honda GX670 trips breaker, won't immediately restart

I have a Honda GX670 repowering an old bobcat skid steer. Recently the engine started tripping the 3amp circuit breaker in the key start module after running for 20-30 minutes. Upon resetting the breaker, the engine won't restart until after 15-20 minutes. The cycle repeats. I tested the regulat..

2023/09/03 16:46:59
Buckwheat

Ryobi S430 4 cycle trimmer

This thing runs great indefinitely as long as I don’t let it rest too long. But when I shut it down for say 10 or 20 minutes and start it again, it runs very poorly. Spits and sputters and just won’t get to smooth high rpms. Next time I start it from dead cold it’s fine again. Same issue repeats if ..
6
2023/09/03 09:47:15
Calimark

Honda Gv 160 help

I have a no start issue. Drained gas tank, filled with fresh. Starts for a moment with starter fluid help. Immediately dies like it's shut off. Pulled the wire off going to the shut-off switch and the wire going to it is still grounded full time. Is this normal or is this my issue?..
1
2023/08/29 08:01:15

<< ..4 5 6 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account