Briggs & Stratton Forum

Briggs & Stratton Forum
Post New Thread
Regular
Ivan Bravo

My generator Coleman powermate pm0261512 is in NG fuel mode but i need to change it to LPG I need the Nozzle inside Carburator Cuzz i Losse it please help me

I need the nozzle insede Carburator to change my Generator to LPG Fuel my Whatsapp is +505 86203307 email:[email protected]..

2025/07/02 05:59:09
[email protected]

Need help on Briggs & Stratton 6.75 HP OHV engine electric diagram

Hi, I am wondering if anyone have, electric circuit diagram for Briggs & Stratton 6.75 HP OHV engine, I couldn't find anywhere I looked. This on a generator. I have no spark coming at spark plug, replaced the spark plug, on-off rocker switch and ignition coil, still no spark. I like to verify th..
7
2025/07/01 17:57:58
scarlislek

Briggs Stratton 1980s 3.5hp horz w/ pulsajet; only cranks with starting fluid; runs great

I have a Briggs & Stratton horizontal shaft (from old McLane/Craftsman reel mower) with a Pulsa Jet carburetor. I have a weird one in that the engine only cranks with starter fluid sprayed into carb, but once running ... it runs just fine.The engine is 80202 0855-02 80032601. It has the carb wit..
5
2025/06/28 14:39:11
lrodptl

22 HP B&S 407777 0607 E2 on Craftsman YS 4500

Mower would not run under a load. Changed 697722 carburetor with aftermarket carb. Fuel is filling the air intake. I can't find the exact throttle/choke hookup. Is there a spring on the throttle linkage that I lost during the change, maybe?..
6
2025/06/28 14:35:29
Trupp

Searching for right carburator

Need a carburator for a model 255707 109 01, don't think there are any available from briggs and stratton. But an after market may fit..
1
2025/06/22 14:15:41
Bigjohnson

John Deere LA105 won’t start

Have a 19.5 Briggs in a John Deere . Have replaced starter twice ,& solenoid and battery . After running it won’t start back . Just barely bumps the flywheel . Tonight I adjusted the valves to factory specs hoping that would help. It started first try ,& then 5 min later started doing the ex..
2
2025/06/18 19:17:20
cheltemes

Need a flywheel P/N cross reference (Briggs 21 hp Intek)

I need a new flywheel for a 21 hp Briggs model 331877 0869 G5. This is an Intek engine for a riding mower. The parts manual says the Flywheel is 698281. But, every website I search says that P/N 698281 is no longer available or discontinued. I have searched to find what P/N replaced this one, but no..
17
2025/06/18 07:30:47
TC10284

Briggs 256707 0119 random surging at full throttle

I have a 90s model Wheel Horse 210H with Briggs 256707 0119 engine. It came with the incorrect carb. I have tried two different aftermarket carbs and they are sort of harder to find for this engine model. I can get the engine to idle fine. I can get the engine at WOT fine, most times. But as soon as..
1
2025/06/15 09:03:34
Thrilly

Briggs and Stratton 300e series mower not starting

Hey all, new to the forum. I greatly appreciate in advance any and all advice given. Working on getting my Hyper Tough Briggs and Stratton 300e series gas push mower to start but no luck so far. Put fresh gas in it as it had bad gas. The oil level is sufficient but will need changed at some point as..
1
2025/06/11 19:45:37
RetiredMarine

Briggs and Stratton 44s977 Choke-o-matic

New to this Auto choke idea. Swapped out a Kawasaki fr691v for a B/S 44S977 on my Hustler Fastrack. Its got the auto choke so I'm not using my choke cable but before I take it off I wondered if anyone had a reason to go the route of getting rid of the "Choke-O-Matic"? Chris..

2025/06/11 15:22:06

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account