Briggs & Stratton Forum

Briggs & Stratton Forum
Post New Thread
Regular
ueww40

Governor Adjustment for 20 HP B&S V2

I just replaced a blown governor on my 20 HP twin B&S engine and now I am in the process to adjust it and I am not quite sure how to understand the manual. My throttle is twofold. The first 80% of it is throttle and the last 20% of it pulls the choke. The manual says to turn the control swivel C..
18
2025/03/01 06:32:11
Harrison DM

17.5 Briggs and Stratton

set throttle cable and runs rich back tires through carb. Seems like the gov. Spring is weak. Is there a starting position for the throttle lever before I lock down the cable...
1
2025/02/25 17:49:59
Steverino

25HP Intek V-Twin OHV Top No Load RPM?

Model 445777 0264-E1 Code 051121YG Engine's on a JD 155C tractor. I've got the repair manual for this engine but not the Microfiche MS-6225 or Sales Manual MS-4052. Anyone know what the Top NL RPM should be? My "guess" would be around 3450-3550 RPM. (Not great at guessing) Thanks in advance!..
4
2025/02/18 11:54:31
76FX

Regarding checking oil.

I have an older Cub Cadet with a Briggs motor. My Briggs repair manual shows oil capacity to be 48 oz, but after 32, it shows full. This engine has a dipstick and I'm wondering what the proper way to check it is. Should the dipstick be screwed down, as if in normal operating position or should the l..
8
2025/02/08 13:24:22
PBM

Briggs 3HP horizontal shaft with Pulsa-Jet/Fixed Jet carburetor adjustment

Greetings Folks,I am working on a 3HP Briggs and Stratton horizontal shaft motor, #80232-2242-01. It has a Pulsa-Jet/Fixed-Jet carburetor on it. I thoroughly cleaned the carburetor and replaced the diaphragm on it and installed with new intake and gas tank gaskets. The motor starts and pretty well w..
3
2025/02/04 11:30:31
SGMJCarlson

12.5 Vangaard Opposed exploded view

Hello, i have an old opposed motor, the intake valve is not moving (it is loose) on one of the cylinders. Do the Camshafts break on these, or is there another issue awaiting me inside the engine case?Does anyone have pictures of the inside of the motor (or alike model) ThanksJohn..

2024/12/20 15:40:22
Robo1982

31 series intek mystery spring

I was given a stripped down single cylinder intek 31 series in a box that was pulled down for rebuild...all parts appear to be there according to the parts breakdown but I also found this odd little spring...any ideas what this is from as it isn't on the parts breakdown at all..
1
2024/12/15 06:02:00
kjohn1956

Briggs Stratton Intek 22hp, choke issue

I have a B S model 44n6770045g1mm0024. Starting when cold requires manually lifting up on the linkage rod going to the choke. This unit has a throttle lever that when pushed beyond full speed operates the choke. When pushing the throttle to the choke position it has no effect on closing the choke. T..
3
2024/12/09 06:33:15
Janherrie08

3hp briggs & stratton stalls

Hello, So I have this 3hp briggs and stratton that sits on a garden tiller but after I start it about after 10 minuten it stalls. Do you guys have any ideas why It might stall?..
4
2024/11/26 14:51:52
OregonGuy

Engine Knocks after changing to electronic ignition

I recently moved away from points to an electronic ignition on my 1975 tiller. It has a B&S 80202-0659-01 75110303 engine. Changed over because wasn't getting a spark. Runs now but with a very severe knock. Never had this before. Wondering if the two could be related (timing)? Actually hoping it..
4
2024/11/25 16:32:30

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account