Husqvarna Forum

Husqvarna Forum
Post New Thread
Regular
WvRodger

YTJ23V48 drive tension spring

Husky owners, My shaft assembly brake control rod Item # 64 on drawing 96043008601 does not have a spring item # 161. I purchased the spring however the hole the spring connects to and it’s other connection point are not visible on my machine. I searched all of that shaft that is visible under the m..

2025/07/01 15:54:54
WvRodger

YTJ23V48 drive tension spring

Husky owners, My shaft assembly brake control rod Item # 64 on drawing 96043008601 does not have a spring item # 161. I purchased the spring however the hole the spring connects to and it’s other connection point are not visible on my machine. I searched all of that shaft that is visible under the m..

2025/07/01 15:54:54
MrT

Broken Husqvarna Z4824 deck rod no longer available???

Hello everyone! I have a broken deck rod on a Husqvarna Z4824 and evidently it's no longer available anywhere. Do I have to make my own or is there maybe a suitable replacement out there??? Here's the part: 539110306 Deck Lift Rod Any ideas? Thanks in advance!!..
2
2025/06/30 21:29:11
mastercraft

Zero Turn belt falls off

bought a used 46" unit this spring. in great condition and runs great. the deck drive belt seems to fall off at least once every time i use it. previous owner did not hide the fact that it does happen guess i did not know how often. the pulleys have been changed and belt is tight. any thoughts ..
3
2025/06/27 12:57:14
boutym

Z248F seat base replacement

I'm in the process of replacing the plywood seat base for my mower and after getting the cover off the bottom I was floored that the plywood base is not sealed sufficiently to keep water and moisture from rotting the wood. It was a hot mess after 3 years of owning it and it very, very rarely was wet..

2025/06/26 10:28:17
westaviation

I’m an idiot

I inherited an MZ5225 with a blown engine from my dad. I bought and installed a brand new HV764 engine, and after mowing for about 45 minutes, the drive belt broke. I picked up the mower with the loader of my tractor so I wouldn’t have to bend or stoop (I’m an old man) and installed the belt. When I..
1
2025/06/18 07:10:55
boutym

Z248F Deck Belt Will Not Fit

Go to change the deck belt on my Z248F and the new belt absolutely will not fit the deck. It's the correct part number belt and it looks to be too short by maybe a few inches. The old one was toast, so can't compare the length. Anyway, I fought with this thing for 45 minutes and thought to myself th..
3
2025/06/15 10:17:37
buchez

Husqvarna TS 248G Clear Cut deck won't level

I have a TS248G with the Clear Cut Fabricated 48" deck that I just cannot get level. It was fine last year when I put it away for the winter and this year the first cut, issues. I live roughly 45 miles north of Atlanta GA for climate reference. The left side blade measures from front to back tips a ..

2025/06/06 13:29:01
vayankee

Husqvarna TYH 18542 loose deck belt.

The deck belt looked quite loose (probably an inch and a half deflection in the belt half-way from the motor spindle), and the machine would not cut, with the belt fallen off one or two pulleys. I watched some YouTube videos which led me to the cable adjustment. I pushed the adjuster all the way in ..
4
2025/06/05 08:51:34
fijimark

Honda GCV160 RPMs won't go down on Husqvarna HU700F

I am at my wits end. I cannot get the RPM on this Honda GCV160 to go down. I have adjusted the idle screw and the governor arm. I can't get it to reduce...
2
2025/06/02 17:02:47

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account