Kawasaki Engine Forum

Kawasaki Engine Forum (p.3)
Post New Thread
Regular
Bart

Engine stops after running a bit

I think it is a FD750D I know its a 27hp Kawasaki in my Simplicity Mini Tractor with 1k hrs, It's 3:30 am and am not going outside to verify right now. I've Goggled till I cant Goggle anymore. I was going to change the coils next but I do not think both would go quit working at the same time.When it..
6
2023/07/11 04:09:45
GP

Fh601v-js06-s

Took my mower to local repair shop and he said it needs a new head. Apparently the valve seat came off and bent the valve. He said he replaced the valve seat and put in a new valve but after letting it run it happened again and bent the new valve too. Just curious if this is common or if someone els..
1
2023/06/22 08:29:37
legendarylawnsatl

FH580V High Idle Adjustment Trouble

Hi Guys, I'm working on a 19HP Kawasaki fh580v on a bob-cat fast cat zero turn. I am in the process of setting the low and high idle speed adjustments. Low speed adjustment went fine, adjusted at the carb and at the control plate set screw per the service manual. The high side is where I'm having th..

2023/06/02 01:35:49
peteeliot

Engine runs 1.5 minutes, then stops.

I am having an issue with a Kawasaki FR730 series motor. It runs well for about 1.5 minutes then coughs a time or too, then quits. a couple of key points: I can keep it limping by putting the choke to it. If it dies, I can restart it and the symptoms are gone, but they return more quickly.If I don't..
2
2023/05/30 18:13:57
ABaum

FH430v replacement carb - tubing doesn't fit.

Hi folks, have a Husqvarna yth1542xp with a Kawasaki fh430v engine. 20yo now and the carb was acting up so I went on Amazon and got a replacement that said would fit my engine. The only thing that was "off" was the size of the drain port at the top. The OEM carb had the port shown in the p..
1
2023/05/30 17:39:57
fishdmax05

FD750D Carb Issues

I have a 27HP Kaw FD750D on my Scag Turf Tiger, and my carb is in need of a rebuild, or worst case replacement. Problem is the engine ID sticker is no longer on my machine. Is there any other identifying marks I can go off of? I can't seem to find a rebuild kit, and $400+ for a carb is hard pill to ..
6
2023/05/10 19:33:52
rodfl

kawasaki 210d

i have a Kawasaki 210d 5.0PS horizontal shaft this is a old engine and has points. Can anyone tell me what the exhaust clearance gap should be?..
1
2023/05/09 18:35:42
bob1924

Kawasaki FH680D

I have a Kawasaki FH680D and doing a rebuild. I was installing the cam when I found there is not a mark on the crank gear to align with the cam for the timing. Has anyone else come across this and if so, how did you set the timing?..

2023/05/06 17:22:14
cpanthers100

Kawasaki FR691V

I have a Kawasaki FR691V on a Toro Timecutter 5000. I am able to mow without issues until the engine randomly starts to run like it is not getting fuel. I have to turn the blades off at which time the engines idles up and down. Sometimes I have to pull the choke out just to keep it running. Other ti..
1
2023/04/03 09:10:07
Lawnbarber22

Gaskets on Kawasaki Fe120

Hi All, Wondering which way these carb / exhaust gaskets are intended to be installed. There seems to be 2 different materials/sides on these. One is much more plastic-y and smooth than the other. The other side is softer and more of a composite felt (not actually felt, but closest thing I can think..

2023/03/30 09:13:17

1 2 3 - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account