Regular
Igottaguy
New to the forum and looking for some expertise. I have an older Stihl fs66 brushcutter that will only prime with a shot of fuel/carb cleaner directly into the carb. New carb, fuel lines, gaskets. Impulse orifice is free and clear. When I do prime this way and get it running, it idles high. Exhau..
2024/04/07 07:59:48
Bo
Chainsaw boggs down under load, fuel good, new spark plug, air filterfuel filter, same problem. Any ideaswhat causes this problem. When running andyou throttle up, you can tell it is not running right.thanks..
2024/02/27 19:38:00
rob1184
Stihl ht75 pole saw has no spark. Changed spark plug (checked on different motor - ok) changed coil, check stop switch, but still no spark????..
2023/11/10 08:01:43
[email protected]
hi guys a recently changed the crankshaft on my BR500 as the bearings where noisy and machine didn't sound great so I took it apart it works out for about an hour then it started to lose power then heard a band and smoke came out of the blower tube anyone got any ideas on the problem at all.....
2023/11/10 07:46:50
