Toro Forum

Toro Forum
Post New Thread
Regular
[email protected]

Toro ring deck needed

The part I need is a Toro 88-9780 which is a steel ring in several pieces that bolts to the deck. I hit a rock and mangled mine. It is discontinued and no where to be found. The mower is a 71182 12-32 XL Toro tractor. Thanks!..
5
2025/06/12 06:41:18
LostInSpace

TimeCutter Caster Fork Issue

This past weekend I purchased a used TimeCutter SW(the model with a steering wheel). While cutting my lawn, I noticed the mower was unable to make a "true" zero to the right side. Jacked up the front and found the metal "mudflap" thingy on the backside of the caster fork was bent and hitting a bolt ..

2025/06/09 22:36:52
Left

ToroZX600 Spindle Pulley

I cannot separate the shaft from the pulley. As a result, the parts are still connected to the deck. I cannot remove the parts until I can separate the shaft from the pulley. I have been banging on the top of the shaft (with nut attached) for two days…soaked in PB Blaster for 2 days as well. Do I ju..
6
2025/05/04 07:57:46
chazdo2

60 INCH TORO TIMECUTTER MY RIDE SEAT HELP!!!

How in gods name do you raise the seat on this mower or don't you? Every video I see is the one with the battery under the seat. Mine has the battery next to the seat on the right under a cover. I need to look at the parking brake switch and that's the only way I see to do it?..

2025/03/11 07:56:51
Sumuno

Toro 20113 Recycler

I have electric start and other day I removed battery to charge it up, now when I go to start it the cable let go on handle. It’s like something is missing, when I held down the traction control handle “ I think that’s what it’s called “ the cable let go and plastic sleeve is bent. Any ideas, I don’..
4
2024/08/26 14:15:37
Marshcutter 74640

Timecutter 4260 gremlins

For the past year I've had to jump the solenoid to start the mower (all other components have been working fine). Today I swapped the solenoid (along with choke cable, spindle and new belt) but it didn't fix the problem. Also, the brake switches stopped working after I swapped the solenoid a..
1
2024/08/17 14:38:23
Jdm

Part ID needed

I somehow sheared off my deck idler pulley arm bolt. On the diagram online, it shows 2 friction washers, 2 plain washers, and 2 more unlabeled washers on each side of the idler arm. I found the friction washers and plain washers in the grass where my mower stopped. Any idea what the other washers ar..
3
2024/08/13 07:48:56
Begwi

Toro 15-38HXL dies after mowing for a while

Thanks in advance. I have my fathers old Toro 15-38HXL that has been cutting grass for many years with few problems. Lately, it completely dies while cutting the grass. It does not seem to do it with the blade dis-engaged. The seat safety switch seems to work fine. The PTO switch also works as does ..
6
2024/08/11 16:48:59
Greendog

TORO Z597D 72 inch cut, Briggs Diesel

Hi All, Have a no start condition. No power getting to the starter relay. All relays tested. (4). Handle and seat interlock switches test fine. Ignition switch failed on the X and Y spades which relate to that seat delay module and overall starting of the engine. Ive replaced the ignition switch. I ..
5
2024/07/13 22:28:53
GroundskeeperWillie

TimeCutter SS5000 Starter Model Number

Hi all,Forum lurker for a while. Have a question and issue and didn't see any posts related to this. If so, my apologies. TimeCutter SS5000 - Model 74630 - (oh yea it's got some age) just 'thumps' when trying to start and will occasionally attempt to turn over. New battery, fairly new solenoid, gets..
1
2024/06/17 19:54:20

1 2 3 - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account