Generator Forum

Generator Forum
Post New Thread
Regular
MoreBloodWine

Adding VFT to a genny without one...

Normally this would plug into a harness off the main breaker for something like the Wgen9500. Well, my 4650df doesn't have a main breaker ahead of everything, or a harness plug for this VTF. So while I have the skills for wire work to add an accompanying female plug. I'm at a loss as to how ..
1
2025/03/13 02:57:14
LooSaphyR

Exploded Honda UE 1000i carburetor hose placement

I'm getting old. I somehow forgot exactly where all the hoses attach (e.g. fuel line to carb), assuming this is why not starting. Hoses wrong. Please help. Can't afford shop manual. Temporarily homeless living in a tent. Thank you..
1
2025/03/12 18:18:36
Soundside

Gx390 issues

I’ve got a clone gx390 13 hp generator. The carb developed a leak. I replaced it and now I can’t get it to start. I thought the first replacement carb might have been bad so sent it back and ordered another one. Same problem. I can sometimes get it started by forcing the throttle to minimum and hold..
1
2025/03/10 08:07:43
Waterworks

Chinese QL160 engine inverter generator

This has an inverter board controlled carb with stepper motor, it's running rough at high speed, running it with the carb motor disconnected is the same so it looks like it's not a fault in the electronics, I have cleaned the carb but it wasn't dirty, can anyone advise on where the high speed circui..
12
2025/02/14 07:48:30
Waterworks

Strange fuel issue

Someone accidentally put Diesel in one of our 3000 w generators , maybe about a third of the tank mixed with petrol , it now starts everytime with just one small jerk of the pull cord , much faster than before, though it runs OK with no smoke it's not producing full power , we are wondering how that..

2025/02/06 12:14:28
Gotafixit

Predator 9000 problem

I have a strange problem with my Predator 9000. I have an electric start on it. The electric start works fine and the generator runs and puts out the correct AC voltage. The problem I am having with it is on the 12v circuit for the starter. When the unit is running it is producing 25 volts to the wh..

2024/12/28 12:50:53
vestaviascott

Older Generac 14KW 1800rpm with Fiat 1.6L - Overspeed shutdown - new stepper motor

Stepper motor was replaced Jan 2023. Recently unit stopped working. Starts fine but increases frequency output limit of 72hz and shuts down with solid red light. I suspected stepper motor failure so replaced it today. I replaced the stepper motor because I could not observe it moving during start..
1
2024/12/18 19:38:49
hubot

Not normal Troy Bilt

I have a Troy-Bilt/Briggs Stratton 3250/3500 generator – model # 030378 Serial # 1015494054. I believe the engine is a B&S Series 900, but the only visible markings (without removing engine from the frame) is a sticker affixed to the underside of the engine. The sticker has two barcodes. The top..
4
2024/12/13 17:21:25
Keith0910

Looking for the name of a part for MY gn-190 engine

⁰what is the name of the housing that the low pressure sensor screws into on my gn-190 6.5 horsepower..
1
2024/11/05 13:17:08
peterbilt313

Decal

I bought a Bobcat decal … I can’t get it to stick. The backing and decal stay together. I am trying to place this on my zero turn. Thanks..
1
2024/11/03 06:30:46

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account