Pressure Washer

Pressure Washer
Post New Thread
Regular
TKM

Pressure washer

Hello I am new here and I acquired this Model 020461 pressure washer with a Briggs 126T02-0344-B1cleaned the carb OK ,verified the valves OK .verified the coil Ok ,new plug .flushed with fresh gas . verified Plug was sparking . I can’t get this machine to fart,spit or burp Before I put this thing on..
8
2025/03/18 20:52:27
mboessen

Simpson CM61083-S Pressure Washer Fuel System

New guy here. I'm 71 and have a ton of experience with small engines. A couple of years ago I bought a Simpson CM61083-S pressure washer, I believe on Amazon. The reviews were very good, and the price/performance were very attractive relative to other offerings. I have seen a post online that the en..
23
2024/11/12 14:17:31
racerguy

Stihl electric pressure washer hose

I have a Stihl RE 109 electric pressure washer that I would like to replace the horrible plastic hose on. It appears that Stihl uses a proprietary quick connector on both ends of the hose. Has anyone here ever adapted a "normal" pressure washer hose to one of these? I have Googled adapters and check..

2024/07/15 20:15:02
SoggyCashew

TroyBuilt 8.5hp wont start

Hello, I've read so many posts about repairing this engine by just cleaning the carburetor. Below is what all I have tried so far "With New Gas" 1) Tried cleaning carburator but it was sparkling clean inside. I installed it and tried to turn it over. It didn't want to start, Even w..
2
2024/05/29 20:56:44
Infikiran

Troy Built (Year 2012) Briggs and Stratton 6.5 horse Pressure Washer

I have a Troy Built pressure washer with a Briggs and Stratton motor that I've had for a few years. Yesterday I used it for the first time since last season, changed the oil in it, put fresh gas in, and made sure the air filter was good. It ran well for about an hour or so and then it suddenly got m..
3
2024/05/21 13:10:23
BLCDAD

Ryobi RY14122 Pressure Washer - no auto shut off

I have a Ryobi model #: RY14122 electric pressure washer,Serial #: BM14471D010317. The machine doesn't turn off when I release the wand handle. Several times I've disassembled, cleaned and reassembled the pressure valve that activates the electrical pressure switch; (310870002). The pressure switch ..

2024/04/25 20:28:06
bender1227

My Champion 2650 pressure washer sprays water but has no pressure

My Champion 2650 recently had a clogged carburetor. I cleaned it and everything starting working again, but a new problem started. Water would come out of the hose, but there is not pressure. I checked the water pressure on the spigot on my house and that was fine. I checked to see if the the hose l..

2023/11/14 20:52:43
pperham17

Honda GC160: New plug, New Carb....NO START, grrrr.

First post and hoping this forum can help point me in the right direction. Form: Troy Bilt pressure washer with a Honda GC160 engine I hadn't started this unit in a couple years and haven't been able to get it to start. Here's what I've done so far. 1. New plug, properly gapped which produces a spar..
3
2023/11/07 15:24:38
MaineMan

Honda GC 190 carb gumed up with ethnol gas

Working on a fairly new PW with a Honda GC 190 engine on it. It starts with starting fluid but doesn't run. I suspect the carburetor because my friend left ethanol gas in it for a long time. Exactly what does ethanol gas gum up in a carburetor? I took the carb off, cleaned it and the float bowl, and..

2023/10/16 09:00:33
GLS062866

Setting new AR Gymatic unloader valve

Good morning. Had to replace a pump on pressure washer. engine is Honda GX340. old pump was an AR 4G 3200psi. They don't make a 3200psi anymore so i went with a AR 4G 3700psi. Couple of questions please. The Gymatic unloader has to be set. My understanding is that you set it up so when the unloader ..
2
2023/09/19 01:49:10

1 2 - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account