Small Engine Forum

Small Engine Forum
Post New Thread
Regular
Jim63

Husqvarna YTH18542

I most likely need to pull the Intek 18.5 out and repair it but by the time I purchase the parts to repair for $300 more I could purchase a brand new Enduro 19 hp engine. Is it a simple or fairly simple “plug and play” swap? Thank you for looking at my thread...
1
2025/03/07 06:44:44
Thornback

I Suddenly Had A Thought . . .

A few days ago, a thought popped into my head. As a teenager I had a Cushman Eagle motor scooter with a 5-HP 4-stroke engine. I used to set the points by rotating the crankshaft around until the cam on the crankshaft opened the points. Then I would set them at .030. So now I'm thinking that if the p..
3
2025/03/04 10:39:22
boydog40

subaru/robin EH65 carb needed

i have a SXS with a subaru/robin 653cc V-twin in need of a carb, this engine has the 2 barrel carb and its part number is2-20163it has the Nikki carb with #s 9411 then 150041016 then under those numbers is 266-604all my research shows it to be discontinuedmy question is: is there another carb out th..

2025/03/03 21:53:52
sherri

Perfectly good old engine, except...

Hi everyone. I'm sure this has been asked, but if someone would kindly direct me to a blog, forum thread or other, I would be grateful. I just can't find the right search term. I have an old generator (Powermate 6500) that was kept indoors and only used during rare power outages. How do I go about f..
1
2025/01/22 13:48:07
Batdevice

Trouble with a Kohler CH 760-3051 engine

Hi, I have a Kohler CH750 30 hp engine that is giving me issues. The engine starts and runs great. However, after warming up the engine and opening the throttle wide open the engine starts surging or it may start to belch out lots of heavy grey smoke and appear to run on only one cylinder. I figured..
16
2025/01/20 20:06:00
jamesdjones13076

Wierd hole in crankcase vent chamber

New guy here. I inhereted a old (1999) B&S L-head that I was told had run recently. Upon opening up the crankcase breather chamber, I found what looks like a poorly drilled hole (versus a neat hole in the casting) that I presume communicates with the crankcase. Two questions: (1) Do I assume cor..
6
2025/01/19 18:08:08
Munk

Wizard 148cc push mower engine

Just curious if anyone can help identify or point me in the right direction on this type of engine to get parts or atleast compatible parts and history of them. I'm new to small engines and like to just tinker with them but can't find much on them except it was typically sold at western auto..
3
2025/01/18 06:43:14
BoondocksUtah

Kohler sh265 ARGGGHHH!

I have a this engine on a County Line log splitter. A month ago, it started having issues. It would start and run well for a few minutes and then simply die. Would start right up again, but once more only run, albeit well, for a minute then die. I pulled and cleaned the carb, checked the float, jets..
5
2025/01/12 07:38:36
formula

Tecumseh OHH55 - No Spark

- Got out our leaf vacuum a week ago to start picking up all the leaves that have come down.- On first try, engine fired and then died. Further cranking, shots of starting fluid, etc. and the engine did not fire. - Kept checking things and determined there was no spark. Disassembled things with thes..
1
2025/01/01 21:37:49
Thesmallenginehobbyist76

Yamaha Grizzly

Is it normal for the bottom end vent coming into the airbox to spit oil into the airbox??..
2
2024/12/29 21:23:39

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account