Tractor Forum

Tractor Forum
Post New Thread
Regular
msklass

Issue – Engine will not run. It will crank and just ‘pop’ when starter fluid is used.

Riding Tractor Model: Murry LT100E1350 Briggs & Straton Engine.500 CC 13.5 HP. Carb Part# :592949 Actions Taken:Machine is brand new - Used a handful of times. Fuel tubes are well vented and new.Fuel is gravity fed to carb and filter is not clogged.Fuel solenoid is bypassed with bolt.When carb i..
2
2024/08/20 14:00:00
erisi

Is repair in this case worthwhile?

I have a Cub. Cadet LT1045 that I bought from Lowes several years ago. The engine is shot; water got into the cylinder and I am not sure I have all of the parts at this point. So, is it worth repairing when it will need 4 new tires and a new engine ? Gene..
2
2024/05/13 13:11:41
Atomikal

21 hp B&S Flathead Help

How's it going, I'm new here and wondering if someone can please help me with this problem, I cant seem to solve.So I have an Old tractor I picked up from some guys grave site he made for it in his backyard, decent deal. He informed me he lost spark several years ago and never had time or the effort..
5
2024/05/12 17:49:51
Eric s.

Ariens gt 20 931 series speed

Hello, just got a Ariens GT20, 931 tractor. So im learning about these. Got it to till a garden. I would like to get better control on my ground speed / aka SLOWER. The area that i like the Speed Selector in, is on the edge of the neutral position and even 1/8th inch movement gets to be to fast. Bas..

2024/04/29 01:37:54
Butch1957

Kohler sv530 17hp governor

I have me this " hand me down " lawn tractor that the tractor is not running right. The governor arm has been moved & I want to get it to factory setting but i do not know how. Any insight on how i can get this done ?I went as far as pulling the upper pan off so that i could install a new govern..

2024/04/13 18:23:48
lawnmowerguy

Will tire chains scratch up driveway?

I am wanting to plow with lawn tractor. Will tire chains damage concrete drivewar? I am using a Craftman t3200 and a 48 husqvarna snow blade...

2023/09/30 09:03:17
Bnemo

Ariens GT14 drive failure

Hi all,New to the forum here. I have an older Ariens GT14 that the drive mechanism has failed on it. I was trying to move a log from a downed tree when the system completely failed. No forward or reverse. This is a hydrostatic drive (I believe..) so it's not a clutch type issue. So my question is ....

2023/08/01 20:26:11
[email protected]

Worn Drive Belts

I own a 1996 Murray Riding Mower, 8hp, 30" cut. It has served me well for many years. Finding original parts is getting tougher. Within the last year I have had to replace two drive or motion belts. The belts used were supposedly substitute parts for Murray's drive belt, P/N 037X65MA. I have looked ..
9
2023/05/09 08:21:02

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account