Forum FAQ

Forum FAQ (p.4)
Post New Thread
Regular
Zen

Lawnboy electric starter (Honda160CC engine)

The electric starter does not function. I took it off and put power to it and it turned. I reinstalled it. Battery freshly charged. Turned key, I get power to the starter terminal but it doesn't even click as it normally does with a run-down battery. The mower starts easily with the pull cord. (I've..

2019/09/11 16:25:00
Zen

Lawnboy electric starter (Honda160CC engine)

The electric starter does not function. I took it off and put power to it and it turned. I reinstalled it. Battery freshly charged. Turned key, I get power to the starter terminal but it doesn't even click as it normally does with a run-down battery. The mower starts easily with the pull cord. (I've..

2019/09/11 16:25:00
oldwisebison

Kawasaki 31 h.p. not charging

my kaw.is not charging. I have 24-25 V ac coming out of alternator with new voltage regulator. 850 -31 hp vert. shaft on hustler mower fx850vbs12r. What next!!! thanks..

2019/09/05 17:57:04
Richard 90

Engine won't run with air filter

I have 875 Briggs and Stratton on my Lawn mower, engine number 121S07-0986-F1 This is a rear mounted one.Problem I am having is that will not idle at corret rpms "low" with air cleaner housing installed on carberator. Out the housing RPMS sound fine , but when engage the blade it dies. This is carbe..

2019/07/14 15:19:30
Lewiski

Starting a small engine

My job requires me to start several small engines (chainsaw, gas fan, generator) just to make sure they're operational. I've been told it's not good to start them up and then shut them down as soon as they start running. I'm know nothing about small engines and was wondering why I&#3..
1
2019/05/07 11:52:58
HyperPete

Contact us - Bad link

It sure would be nice to be able to upload / attach screenshots to show you the issue(s) Click Help / FAQ dropdownSelect "Forum Help - Contact Us"Get directed to and receive 404 error (spaces added to hopefully prevent URL from being removed) EDIT: OK, lets try this - the aspx page that you are dire..
1
2019/02/20 20:55:05
genso

I can't seem to find and select craftsman forum

How to select craftsman forum..
1
2018/11/07 22:33:12
BobC

Back order

When are Back order products charged to y credit card?..
1
2018/10/19 10:59:48
Ezlivin

Do I need to replace my control board? Generac Genereator, 9592-3, 5500 kW does not start

Pressing the start switch activates the fuel pump, but not the starter. Fuel primer works fine. Found starter connection relay solenoid was faulty, so replaced. Can jump the solenoid which will activate the starter, but no start up. Have tried starter fluid. Not even a pop. Not sure if the choke is ..

2018/10/10 15:20:02
ob

ccr 2000 new carb runs on full choke then quits

I replaced carb after market easy job started it on full choke and primed it 5 pulls and it ran for 45 sec then died did this again and it repeated I added a new inline filter (arrow to carb) and new high octaine gas with fuel additive however I did not have gas line clips on the filter I am stumped..
1
2018/09/25 11:21:21

<< ..4 5 - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account