Generator Forum

Generator Forum (p.4)
Post New Thread
Regular
patdufo1

posting pics?

I need to add pics to post,my iphone 12 takes large file pictures most sites off to reduce resolution of pics but it apeers not this one?How to reduce?thanks..
1
2023/09/29 19:17:01
tnut

Valve adjustment

I have a Pro Gen Coleman Powermate with a 9hp Briggs. 185432 type 0606E1 code 99110949The only valve adjustment I can find tells me .002-.004. I set them both on .004 but was thinking the exhaust should be more like .006 ? Can anyone confirm if what I found on that series engine is correct. Thanks..
3
2023/09/26 15:07:34
patdufo1

powermate 9400 to titan 7200D power head swap wiring

I have a titan diesel generator I believe it’s a 7200 anyhow, they are known for the fan grenadIng with low hours the one I got has 66 hours I see several on marketplace same problem when it goes it takes out the stater and the windings brakes wires off, I took a generator head off of a Generac, 940..
1
2023/09/25 16:57:43
Kellypx333

Fuel leaks from air filter on Powerhorse 9000 generator

I have the Northern Tools Powerhorse 9000 generator. Recently I started the engine and while it did crank and run, it sputtered and spewed fuel from the air filter. I replaced the carburetor (it has the electronic solenoid on the fuel pot) and when I started it up, it ran great for a few seconds and..
3
2023/09/14 08:02:18
feganx

Why Generac would not repair my generator?

Got a Generac 22KW generator in late 2020. Per Tech, it has run a total of 10 hours. Has been broken for six months. I can’t get it repaired or replaced by Generac despite multiple correspondence. It cost $16k to install the system. I have a 10-year warranty. Anybody have an idea why Generac would n..
6
2023/09/13 19:07:26
Tiredofitall

Honda EB2800 overload then running issues

HiI recently used my 3 yo, barely used (20 hours?) generatort to power a small Makita compressor. It ran fine for a day - not continuously but for a few hours. I ran it off Eco mode to avoid any bogging down issues when the compressor kicked in. Next day I go to use again and it really struggled to..
2
2023/08/15 08:31:59
stevemiller000

L6-30 to L14-30

We have an older generator that has an L6-30 receptacle (3 wire) built in and is labelled 'Neutral Bonded to Frame' The cable we feed the small building with has L14-30 on both ends (4 wire). Can I get an adapter that will plug into the L6-30 and give us an L14-30 Female so we can use our standard c..

2023/07/25 19:03:25
stevemiller000

L6-30 to L14-30

We have an older generator that has an L6-30 receptacle (3 wire) built in and is labelled 'Neutral Bonded to Frame' The cable we feed the small building with has L14-30 on both ends (4 wire). Can I get an adapter that will plug into the L6-30 and give us an L14-30 Female so we can use our standard c..

2023/07/25 19:02:54
Edegbuhu

WHAT DO I NEED TO CONVERT ELECTRIC GENERATOR TO GAS AND NATURAL GAS

Which equipment parts do i need to convert gas to dual usage with natural gas or propane...
2
2023/07/13 12:41:04
Fletcher

Generac Genetator

Swapped out battery - hooked up in reverse. I know. Stupid. Now, no electronics. Generac 11kw. Motherboard? Fuse? Any help appreciated...
1
2023/06/15 07:58:31

<< ..4 5 - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account