Latest Posts

Latest Posts (p.14)
Let's Talk Shop - General Discussion
Thesmallenginehobbyist76

Re: Ultrasonic cleaner

That gives me what I want to know Scott, thanks I am deffenatly going to buy one. I don't really care about the finish because I use a sandblaster right now and it eats down to raw metal. Have you ever cleaned fouled plug? How do they do?..

2025/02/06 14:29:02
Generator Forum
Waterworks

Strange fuel issue

Someone accidentally put Diesel in one of our 3000 w generators , maybe about a third of the tank mixed with petrol , it now starts everytime with just one small jerk of the pull cord , much faster than before, though it runs OK with no smoke it's not producing full power , we are wondering how that..

2025/02/06 12:14:28
SRTsFZ6

Re: Chinese QL160 engine inverter generator

Well that's an easy fix! Tks for the update..

2025/02/06 07:56:16
Waterworks

Re: Chinese QL160 engine inverter generator

I am having another go at fixing this , I have isolated all the electrics, oil switch, inverter board , carb stepoer motor , run the engine over with a drill and there is a continuous spark , there is enough compression , i have checked the pushrods and clearances, the carb was hardly used and clean..

2025/02/06 05:45:22
Let's Talk Shop - General Discussion
Steverino

Tygon vs. nitrile rubber fuel lines

Guess this as good a place to start a discussion! Will be replacing all fuel lines on our JD 155C, B&S Intek V-Twin this Spring, tank to carb. Anyone using Tygon? Read some mixed reviews on Tygon. Some praise it while others mention shrinking, hardening, leaking in 2 years etc. (Not to mention p..

2025/02/06 01:35:18
SRTsFZ6

Re: Ultrasonic cleaner

Before Sonic cleaning:https://i.postimg.cc/nr9P5jDY/Before.jpg After:https://i.postimg.cc/90Tj9NJh/After-1.jpg If you put a piece of aluminum foil in the machine and run it enough, it will literally put small holes you can see thru it. I generally just use dish soap with water does the trick. For al..

2025/02/05 14:16:12
Generator Forum
SRTsFZ6

Re: Chinese QL160 engine inverter generator

What's this mean:? Quote:it will fire over with East Start though. End quote. What's Easy start and what's "fire over"- Spark at the plug, engine now runs, ???? ...

2025/02/05 13:59:45
Waterworks

Re: Chinese QL160 engine inverter generator

I am having another go at fixing this , I have isolated all the electrics, oil switch, inverter board , carb stepoer motor , run the engine over with a drill and there is a continuous spark , there is enough compression , i have checked the pushrods and clearances, the carb was hardly used and clean..

2025/02/05 09:58:32
Let's Talk Shop - General Discussion
Thesmallenginehobbyist76

Re: Ultrasonic cleaner

Does anyone have a harbor freight one?..

2025/02/04 16:58:17
Briggs & Stratton Forum
PBM

Re: Briggs 3HP horizontal shaft with Pulsa-Jet/Fixed Jet carburetor adjustment

Exactly what I was looking for! Thanks for the information Mike1, really appreciate it. PBM..

2025/02/04 11:30:31

<< ..13 14 15 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account