Latest Posts

Latest Posts (p.21)
Small Engine Forum
Batdevice

Trouble with a Kohler CH 760-3051 engine

Hi, I have a Kohler CH750 30 hp engine that is giving me issues. The engine starts and runs great. However, after warming up the engine and opening the throttle wide open the engine starts surging or it may start to belch out lots of heavy grey smoke and appear to run on only one cylinder. I figured..
16
2025/01/20 20:06:00
Locating Parts
PBM

Re: Replacement Coil for 3HP Briggs and Stratton

The number for the 3HP is 80232-2242-01. I don't believe it ever had points/condenser as there is no housing for them. My understanding is that B&S switched to electronic ignitions in the early 80s. This engine is a 1988 (based on Code). I've had the engine for several years and it was running r..

2025/01/17 20:46:29
Mikel1

Re: Replacement Coil for 3HP Briggs and Stratton

Yeah couldn’t find much info on this model. Agree with Conrad..

2025/01/17 17:42:12
Tecumseh Forum
beebad

Re: 10hp Tecumseh engine on MTD 665E snow thrower: gas quirts as I prime

Ye, it says prime 2-3 times….i got carried away and what I am seeing IS the excess pouring out of the open ended carb/choke plate area. ye, I saw that on the bottom of page nine about the wire but no mention of an on or off switch or a replacement cover for the back of the light. thanks for respondi..

2025/01/17 17:39:33
Locating Parts
Conrad Sigona

Re: Replacement Coil for 3HP Briggs and Stratton

Any digits on the line following 80232? Is it possible that the electronic ignition is not original, that is, that the original does indeed employ points? Can you give us a photo of your coil?..

2025/01/17 13:02:42
Tecumseh Forum
SRTsFZ6

Re: 10hp Tecumseh engine on MTD 665E snow thrower: gas quirts as I prime

The primer bulb is not designed to get hard after awhile (like a boat engine primer bulb). All your doing is pushing extra, un-needed fuel into the engine. The excess is simply coming back out. Page 9 of your owners manual refers to the head light wire in question. ...

2025/01/17 06:58:33
beebad

Re: 10hp Tecumseh engine on MTD 665E snow thrower: gas quirts as I prime

The motor cranked right up after switching out the new carb.When I was priming, I noticed fuel would still drip out from the intake/choke area. (The manual says to prime 2-3 times, perhaps the fuel I see is excess fuel from over priming. I usually primed different engines until it met resistance to ..

2025/01/16 23:16:20
Locating Parts
SRTsFZ6

Re: Part Number for Starter

It's usually stamped in the / a valve cover. Or:https://www.briggsandstratton.com/na/en_us/support/need-help.html?icid=homepageredesign_needhelp_icon ...

2025/01/16 12:49:49
AnthonyEaton

Re: Part Number for Starter

Scott, I have looked all over that engine and could not find one, any suggestions where to look?..

2025/01/16 12:45:46
SRTsFZ6

Re: Part Number for Starter

A MODEL # for the engine would help.. ...

2025/01/16 12:43:14

<< ..19 20 21 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account