Latest Posts

Latest Posts (p.3)
Generator Forum
SRTsFZ6

Re: Exploded Honda UE 1000i carburetor hose placement

F16, shown in the diagram, would be the fuel inlet-coming from the fuel pump.The bent tube, just above it would be a vent for the carb. https://www.hondalawnparts.com/oemparts/a/hpe/505ce601f870022d24bde068/carburetor-eu1000i-k1 The nipple on the bottom of the float bowl is simply to drain the carbe..

2025/03/12 18:18:36
LooSaphyR

Exploded Honda UE 1000i carburetor hose placement

I'm getting old. I somehow forgot exactly where all the hoses attach (e.g. fuel line to carb), assuming this is why not starting. Hoses wrong. Please help. Can't afford shop manual. Temporarily homeless living in a tent. Thank you..
1
2025/03/12 18:18:36
Tecumseh Forum
Crobins365

Any interchangeability among HM80 engines?

Hi, All - I'm trying to help my Amish neighbor get a replacement engine for his log splitter. The model number of his engine is HM80 155653S. I've found engines on both eBay and Craigslist that *look* comparable (e.g., a new HM80 155432M, with a 1" diameter crankshaft that's 2 and 3/4 inches long),..

2025/03/12 08:51:51
Toro Forum
chazdo2

60 INCH TORO TIMECUTTER MY RIDE SEAT HELP!!!

How in gods name do you raise the seat on this mower or don't you? Every video I see is the one with the battery under the seat. Mine has the battery next to the seat on the right under a cover. I need to look at the parking brake switch and that's the only way I see to do it?..

2025/03/11 07:56:51
Generator Forum
SRTsFZ6

Re: Gx390 issues

WOT at throttle when off is normal. There's likely a fuel filter inside the tank where the hose connects. I would turn the fuel off first and remove the fuel at the carb (or valve)Turn the fuel back on and look for proper fuel flow. Surging would occur with a "little fuel" flow issue. I suspect that..

2025/03/10 08:07:43
Soundside

Gx390 issues

I’ve got a clone gx390 13 hp generator. The carb developed a leak. I replaced it and now I can’t get it to start. I thought the first replacement carb might have been bad so sent it back and ordered another one. Same problem. I can sometimes get it started by forcing the throttle to minimum and hold..
1
2025/03/10 08:07:43
Small Engine Forum
SRTsFZ6

Re: Husqvarna YTH18542

Excuse my ignorance, but can you please post a link for the "Enduro engine" ? What's wrong with your current engine? ...

2025/03/07 06:44:44
Jim63

Husqvarna YTH18542

I most likely need to pull the Intek 18.5 out and repair it but by the time I purchase the parts to repair for $300 more I could purchase a brand new Enduro 19 hp engine. Is it a simple or fairly simple “plug and play” swap? Thank you for looking at my thread...
1
2025/03/07 06:44:44
Zero Turn Forum
SRTsFZ6

Re: ZTH 4218 Model 968999167

Remove or at least loosen the deck belt. Then spin the spindles and idlers feeling forany roughness / noise. ANY roughness, they need replacement. Now, it seems the bearings inside the spindles are available, part #27: https://www.partstree.com/models/zthkw-4218-968999167-husqvarna-42-zero-turn-mowe..

2025/03/04 13:34:17
Snowblower Forum
ron3033

Tecumseh on 1977 Ariens flywheel

Hi All1.I have a 1977 Ariens ST724 model 924032-008001 with a Tecumseh H70 130210d 7 horse power engine with electric starter 33518A, no lights, points.One extremely cold morning the electric starter broke more teeth off the flywheel ring gear (I had a few already missing). The electric starter gear..

2025/03/04 12:43:33

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account